Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

The car got moved on the weekend to start the Targa prep.

5D94842A-CFD5-42F1-BA4E-1D2313503CE6-326

I took it for a test run today to get reliability testing km into it. revalving of the rear shocks feels good, it should give much more confidence at speed on rough roads.

Hopefully we should get some testing time at Symmons this weekend

  • 4 weeks later...

Well it's been a busy past couple of weeks.

I decided to bypass the heater core to eliminate the possibility of slip heater hoses, I followed some advice on setting up how the coolent lines run from a local bloke who races a RB25. We have since found out that the coolent flows differently between a 25 and a 20, cause I over heated the engine and poped a head gasket. Luckily the head was still within the factory tolerances, so I only needed to replace the head gasket.

We got a good test day in on Saterday with 70 or so laps of Baskerville, the car is consistently lapping about 0.7 secs quicker a lap then last year.

46783919-0E3D-4638-886F-083BDEE47293-742

94A3E243-EFD2-47F9-96EE-BD4BEE86036F-742

well it appears on a 25 you don't need to loop the rear outlet, into the front inlet, so I just blocked the rear outlet. I have now looped the rear outlet into the front inlet.

The car with the 25 I copied the idea from is a very successful circuit car, and has done heaps of race km with the rear outlet blocked

  • 2 weeks later...
  • 2 months later...
  • 2 months later...
  • 1 month later...

I've been pretty lazy since Targa. I had the car out to a club day at Symmons Plains a couple of weeks after Targa, and dropped my pb down to 59.8. Since then the car has been sitting. But it will be back out for a hillclimb at the end of October.

Some pics from Targa this year:

1234007_539315442807121_1510853367_n.jpg

1239418_539314706140528_482773887_n.jpg

1185236_539314996140499_1555837574_n.jpg

1236684_539315159473816_56304496_n.jpg

Full Album

Edited by sav man
  • 1 month later...
  • 2 weeks later...

I think the big inlet ports would make i laggier down low, and I wouldn't be able to run VCT in targa. I did have a good look at it, but I don't think it would be worth it.

I had the car out again last weekend, and I took over 1 second of my PB at Symmons Plains

Footage of me playing with a GT3 RS, and setting my new PB:

486660_10151810833372406_1056022473_n.jp

1452551_10151810832032406_507164168_n.jp

Edited by sav man
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...