Jump to content
SAU Community

Recommended Posts

Hi just and update,

Be a slow process these last few weeks, not much left to go before we can crank the big bitch over for the first time.. Has got 15L of penrite run in oil, in the dry sump tank ready to rock. So the last few days iv been doing all the tidy up jobs. Not long now!!

39555_1682517349894_1446408764_31709648_2660343_n.jpg

148701_1682518109913_1446408764_31709649_4374651_n.jpg

76521_1682518389920_1446408764_31709650_557919_n.jpg

just a quick question: when the engine torques will it do damaged to the top rad hose as its vertually rigid? Looks great though!

the wiggins clamps actually do have an amount of flex in them. I think it should be ok.

great build mate. should be a very, very, very fast car. :P Love that it's still a 2.7 and not a 30. I think for what you want a 2.6 or 2.7 is the way to go as you will want revs and lots of them. :devil:

what kind of gearbox are you going to run in it?

there's a little expandable piece inside. hard to explain but if you've ever held one in your hands and played with it a bit you'll get the idea. it's not a huge amount but they do allow both flex and twist without leaking.

The clamps have a fair amount of give in them, they are rubber o'ring sealed on a feral, the are a pain in the arse to put together but are extremely well made as these are the genuine Adel Wiggins clamps, the 4" clamp was worth $600 and thats each. If you you look at any top notch race cars, weather it be Ken Blocks Fiesta, GT Cars, majority of them run them.

0702_impp_09z%20wiggins_clamps%20tube_connectors.jpg

^^^ ive been tracking kier wilsons gtr since when 1st started back in early 2000...it reminds me of my silver aust delivered gtr & the sound of a 3ltr - well, nothing beats it, sounds like my current gtr :devil:

  • 2 weeks later...

Hi Guys

Another quick update for ya's, engine work is nearly complete, the wiring loom will be finished on thrusday, once thats done just gotta do brake lines and a few other tidy up jobs. Tomorrow we will be test fitting all the body panels and checking the lines of them all and adjusting them so they look shit hot. Here's some quick pics of the engine in its final stages (sorry about poor quality, get some better ones tomorrow).

76951_476525668484_679318484_5674207_1629630_n.jpg

76382_476525708484_679318484_5674208_6977286_n.jpg

150583_476525738484_679318484_5674210_6006185_n.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...