Jump to content
SAU Community

Recommended Posts

Hey guys, jst thought id share a little info i got from a little test i did regarding those 'octane boosters'

anyways I recently filled up with a bad batch of fuel and im getting 'safe' but increased knocks then usual; normal from watching my pfc hand controller for the past year is 13-27 (max 29-30 on a hot day)

With this current batch of fuel im getting 37 average at 6000rpm 2nd gear and 5000rpm 3rd gear.

Info from pauls pfc faq tells me that its still safe but i thought it would be a good chance to test some octane boosters to see if there is a difference. Anyways I drove the car as-is; warmed it up for 15 minutes and ran on a stretch of road in 2nd n 3rd gear (2nd to 6000 and 3rd to 5000)

Result was: 38knock in 2nd, reset n 36knock in 3rd.

I added the nulon octane booster (the pro strength thing from autobarn at 25bux) and drove for 10 minutes to disperse the contents then ran the same stretch of road again; results were: 25knock in 2nd @ 6000rpm and 29knock in 3rd @ 5000rpm.

anyways just wanted to share the info with you guys cos im pretty happy, dont take it as 'proven' jst wanted to share.

-Johnny

post-4266-1251690922_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/285847-octane-boosters-test-n-results/
Share on other sites

Didn't some mag do a test on all the octane boosters and the Nulon Pro Strength was the only one that made a decent difference? While working at Autobarn the Pro Strength was definetely the best seller.

Edited by PM-R33

I find they work well with shitty fuels, but don't expect it to anything after adding it to fresh premium petrol.

I have an octane booster that I import from America for about $2.50 a bottle (treats 20 gallons / 80 litres). When I mix that with regular unleaded it feels just like Optimax.

One thing to be weary of is these additives sometimes leave deposits in the fuel system.

Ive tried heaps of them and i found out that the only one i noticed made a difference in driving as well as knock was the Nitro NOS octane booster ill post a pic up so you see which one i mean but these do come at a cost though at $40 a bottle to treat one tank of fuel lol and i also found that martini ones are not bad either but be careful, some of them contain lead as well as other chemicals that are not good for Oxygen sensors valve seats and etc.

heres a photo

post-46081-1251701851_thumb.jpg

agree with the others, i dont see the point of octane boosters

either

a) get proper 98 fuel

b) tune your car on the best fuel you can get ie 95 penis if your in a shit area etc

c) if you get a bad batch of 98 PFC users can use temp ign adjust to back out a few deg, or just baby it around

c is my preferred if i buy 98 and its penis fuel 98ron

b is recommended instead of using 95ron and octane booster each time

a is preferred for all around

i found the big wynns race formula to be the best... mind you i just bung the lot in.... they are all evil on spark plugs

http://www.wynns.net/retail_raceformula.aspx

http://www.wynns.net/product_files/Race%20...43905%20PIS.pdf

Edited by URAS
Didn't some mag do a test on all the octane boosters and the Nulon Pro Strength was the only one that made a decent difference? While working at Autobarn the Pro Strength was definetely the best seller.

This Bob Komtel - Street Machine article mentions it, and IIRC he wrote another column about a comparison of octane boosters and Nulon came out on top. Cant find that one tho.

you cant say its a waste of money, its just over priced for what they are.... and they dont create deposits, if anything they help burn the build up and clear it away....

it definately reduces knocking which on a track day could save your engine, not everyone tunes their car every time they throw on new bits... fuel is never at a constant ron rating.... sometimes we will think we're buying 98 ron but we get 97, sometimes its 99, if a car is tuned at 99 and you get a 97 ron in it you will feel if not hear the difference.... then octane booster will help aswell.

ive only used the stuff once and the car does run smoother, but thts in my car, yours may behave different.

either way the stuff is too expensive for what it is

they are all evil on spark plugs

And here in lies the problem :laugh:

If you love changing plugs every few tanks - go for it.

Otherwise, just use good fuel.

Octane boosters are a one-tank wonder, nothing more.

The best thing you can do is buy a drum of race fuel, mix a tank 30/70, much better than these additives.

Thankyou for this reply, i actually went to autobarn to buy a drum of race fuel to mix a tank but they said that i required some form of liscence to buy it; now is this right or is the bloke at the store just a 'know-nothing, know-it-all'

seems they had a leaded 100octane there for 75dollars/20litres

I actually bought 2 addidtives; the nulon one and another best seller which ill try next time.

with this new spark plug issue thats jst come up, ill be looking at mixing race gas with my pump tune for a litttle extra safety.

any info on the liscence???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...