Jump to content
SAU Community

Recommended Posts

58 minutes ago, FedBpy2018 said:

I disagree, last night took mine out to a dead back road, launched from 3k revs very little tyre spin and it launched hard without an issue, redlined it through all the gears and drove quite freely and smoother around turns then my other car by far at high speed

WTF has that got to do with HICAS?  Do you actually know what HICAS is supposed to do?  It's not a traction control.

HICAS is supposed to move the rear wheels to invoke a slip angle earlier than would occur under passive drag along of the rears (caused by the front's making the car start to rotate).  It is supposed to make it feel "snappier" on turn in.  Whoch it does, as long as you're not on the verge of losing grip.  Now, that "as long as" is fine, up to about 7/10ths.  After that, as you drive harder, especially as you push right up near the limits, the rear will be on the verge of breaking free and a skilled driver will be working to balance the steering and throttle inputs to control that.  The last thing a skilled driver wants is for some 3pt IQ computer system to be raggedly sawing away at the rear steering control trying to do what it does, because it actively fights against what the drive is trying to do. It is a shit system.  Even worse, all you have to do to make a Skyline turn in better than it does with HICAS is simply upgrade all the suspension - which we all do anyway.  Some bigger ARBs, better dampers, some bushes and a decent alignment are 50x better than HICAS.

So, please consider that set of facts.

Yes i know what hicas is meant to do, its a rear steering assist unit designed to help improve handling around turns both at low and high speeds, its more noticeable at high speeds, what you describe is 100% different to what actually happened, all it did for me was improve my control as its designed to do and as i said previously it did not "fight" me for control, those are the facts, all your doing is repeating your view thinking you know everything which obviously you dont, if you did then my r33 should have acted the way you state more so for the fact that it needed an alignment when i done it last night, so it should have been worse for me, each gear change i hit my limiter everytime, from 0 to past 180 on the speedo

16 minutes ago, FedBpy2018 said:

The road wasnt straight, just didnt have any really sharp turns but has a few bends

I think the key thing everyone is missing in your post is that HICAS is supposed to kick in hard when you are about to lose control around, say, a sharp corner, and helps balances the steering to avoid this, but from the sounds of things you weren't going around a tight corner and you weren't losing control (in a bad way) so that's why HICAS didn't kick-in as such. 

I personally find the HICAS system to be a supportive system as when I take on corners hard I can actually feel the independent rear wheel steering assist mechanism kick in which, in my opinion, can only help. 

2 hours ago, Dose Pipe Sutututu said:

I am sure my wife's 162TSI Tiguan would perform better than a stock R32~34 GT-R around turns 

Yeah, so can my 2019 Toyota Kluger but who's comparing, right?

Like, come on man, stop adding insult to injury. 

1 minute ago, Dose Pipe Sutututu said:

Show us a photo of the Tigs you drive :) 

Show us a picture of your wife..

 

 

 

 

 

 

 

's Tig..

 

I still have HICAS on my R33, and agree on a spirited mountain run it's not that noticeable (as GTSBoy says, 7/10ths vs 9+/10th), when i take it to the track though, it's borderline terrifying, so unpredictable. Really need to remove it one of these days.

8 minutes ago, GTofuS-T said:

Show us a picture of your wife..

 

 

 

 

 

 

 

's Tig..

 

I still have HICAS on my R33, and agree on a spirited mountain run it's not that noticeable (as GTSBoy says, 7/10ths vs 9+/10th), when i take it to the track though, it's borderline terrifying, so unpredictable. Really need to remove it one of these days.

This is an honest question - but I've never driven a GTST only GTRs...is the HICAS on both cars the same and works similarly? 

1 minute ago, Robocop2310 said:

This is an honest question - but I've never driven a GTST only GTRs...is the HICAS on both cars the same and works similarly? 

Yep, I drove a R34 GT-R around Japan.. was a piece of shit.

Needed a single, and HICAS delete :) 

Just now, Dose Pipe Sutututu said:

Yep, I drove a R34 GT-R around Japan.. was a piece of shit.

Needed a single, and HICAS delete :) 

I bought my R34 GTR with upgraded twin turbos so wouldn't know to comment on stock set up but this is interesting.

Uumm...never knew GTST's have HICAS...dumb of me, I know to assume.

 

6 minutes ago, FedBpy2018 said:

That also brings into what your car is used for as well, different uses have different setups, for example, i wouldnt take a car built to drag race out drifting or track racing

why would you even build a car then?

The more money I've poured into my car, the more I've taken it to Wakefield Park to enjoy. There's simply not enough road and rules for a built car on our streets.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...