Jump to content
SAU Community

Recommended Posts

Some purist says, R33 is the best in term of power and ride & handling outshine its other sibling. I read in few mags confirming the R33 as the best Skyline with RB engine ever. R32 was perhaps the one that changed the perception of Japanese Sport car through out the world, R33 polished and enhanced it to next level. R34 was said to be too heavy, too tech savvy and being call Play Station Generation's car.

In Malaysia, R33 is very2 less respected and 'ashamed' compared with R32 or R34 due to the similarity in its design with Perdana wannabe Skyliner.

R31 is almost unheard before as it was marketed for Japanese market only. I've been told R31 is a respected beast till today in Japan as it conquered Japan domestic races and underground races during its heyday.

:)

This really just comes down to personal preference.

R32 GTR claimed its name in bathurst back in the day and still till this day seems to break records against its youngest brother the R35 GTR

I prefer the interior of the r33 and r34 over the r32.

I would buy a R34 GTR over my 32 GTR anyday but I cant afford too :)

so yeh i think each one has its pros and cons.

no car is ever perfect

my 2cents

  • Like 1
This really just comes down to personal preference.

R32 GTR claimed its name in bathurst back in the day and still till this day seems to break records against its youngest brother the R35 GTR

I prefer the interior of the r33 and r34 over the r32.

I would buy a R34 GTR over my 32 GTR anyday but I cant afford too :)

so yeh i think each one has its pros and cons.

no car is ever perfect

my 2cents

R32 & R33 the best car.?

Best on a budget. I think you'd be hard pressed to find many peoplw who'd say that a 33 or 32 would be better than a 34, but you'd also be hard pressed to find anyone who can afford a 34, since they cost 50K AUD or so.

ah so itsa GTR's only being talked about here? Makes a bit more sense then i guess.

I'd agree with Sarumatix's quote although do not know much about the r31 the descriptions of the 32/33 and 34 seem pretty spot on to me

Some purist says, R33 is the best in term of power and ride & handling outshine its other sibling.

:)

I read in few mags confirming the R33 as the best Skyline with RB engine ever.

:)

They have the same engine, with more torque as each new model came out.

R32 was perhaps the one that changed the perception of Japanese Sport car through out the world, R33 polished and enhanced it to next level.

The R32 and R33 GTR have the same engine.

Was probably tuned to have a bit more torque but that's about it.

R34 was said to be too heavy, too tech savvy and being call Play Station Generation's car.

Any car with a MFD, ppl say it's to savvy.

Playstation Generation cuz all the kids who play Need 4 Speed Underground, don't have the chance to drive a real R34 GTR, they praise it in the video game like crazy.

In Malaysia, R33 is very2 less respected and 'ashamed' compared with R32 or R34 due to the similarity in its design with Perdana wannabe Skyliner.

R32 and R34 GTR's look better.

R31 is almost unheard before as it was marketed for Japanese market only. I've been told R31 is a respected beast till today in Japan as it conquered Japan domestic races and underground races during its heyday.

Dispite it's 'grandpa' styling, it took the Skyline 1 step closer to the GTR's.

post-46584-1263779375_thumb.jpg

For GTRs my personal opinion is the R34. Nissan studied what they did wrong with the R33 (too heavy, less GTR appeal) and tried to make a car that was closer to the R32. Remember at the time the NSX was out and was technically a superior car to the R32 and R33. Nissan had to come out with something better and the R34 was the end result.

Next is the R32. It just looks better than the R33, lighter and tossier. The muscular lines is what started the GTR appeal in my opinion, the R33 had less of it which looked more like a Falcon or Telstar. The R34 took aggresive styling to another level.

I have less knowledge of the R31. I watched them raced in Group A racing in Australia with George Fury at the wheel and enjoyed watching the blue/white/red cars take on the locals (which they did very well). I think that was when I became a fan. When Godzilla came it was like the missing link of Australian motoring. That was how significant the R32 was.

It seems that I'm not a fan of the R33 because of the styling. I think dark colours like black or midnight purple with offset rims suits them best.

HR31 feels antiquated to drive IMO especially compared to the R32, also feels like you're sitting on the passenger's lap since it is quite squeezy inside.

Depends otherwise on whether you're comparing GT-R or not, R32 w/RB25 is the ultimate Skyline IMO

I have had a 32 and a 34 gtr and both were brilliant, the 34 certainly had a much nicer interior.

I struggle to be engaged by the 33! I am surprised that any purist would pick this vehicle as their

weapon of choice. Especially with models like the 34N1, nur, or aus delivered 32 in the mix.

Aren't we glad that it's the NISSAN MOTOR Co. that conceived > designed > R&D'd > manufactured all of the above?

I know I am!

I think somehow, that Carlos Ghosn has been!

:domokun:

:rofl2:

They have the same engine, with more torque as each new model came out.

The R32 and R33 GTR have the same engine.

Was probably tuned to have a bit more torque but that's about it.

I thought Nissan revised a few of the ancillaries with each revision of the GTR.

One that springs to mind is the bearing to the oil pump, if i recall correctly, the bearing (or something) is too small on the 32 and is prone to screwing up and causing oil supply issues.

That said was a while ago that i read that... so i could be wrong.

I thought Nissan revised a few of the ancillaries with each revision of the GTR.

One that springs to mind is the bearing to the oil pump, if i recall correctly, the bearing (or something) is too small on the 32 and is prone to screwing up and causing oil supply issues.

That said was a while ago that i read that... so i could be wrong.

Yes, I too have read about that.

The R32's weak oil pump drive collar, which tended to fail in higher power applications.

So when highly modifying a R32 GTR, that will need attention to.

For stock, light and mid modifications, it is fine.

It was fixed in the R33 GTR, with a wider collar.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...