Jump to content
SAU Community

Recommended Posts

jap average is around 15k even though for some reason everyone assumes otherwise. This is why it should be assumed that cars are wound back.

If they were such perfect low km examples, they would have been bought by the domestic market, not flogged to overseas customers at the auctions :)

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

I paid a good price :)

The car was imported in 2000 with 2,000kms on the clock. That owner had it for 2.5 years and put another 12,000 on it. So yeah - I was lucky. Just like a run-in new car.

I think a lot depends on locality. A lot of people in the Tokyo area only use their cars on the weekend, so a lot of those cars can go 2 or 3 years without putting on any serious K's. Where I am, out in the mountains, there isn't much public transport, everything is spread out and owning/driving a car on a daily basis is just about unavoidable...

in the last 2 years I've owned the car I think I put about 25000 k's on the car. I got it at a cool 40000k's (with books and service manuals from a nissan authorised dealer to back it up) and the servicing was as regular as clockwork too, I think the previous driver was a hot jap babe or sumfin (knowing my luck it'll be a non-milfish mom).

Bought the car 2 1/2 years ago with 42,000 on the clock. The condition of the car and the log books matched the KM stated.

Now it's up to 85,000 and hasn't missed a beat.

Had the front castor rod thingies replaced but that's it.

J

bought it with 65000km, now 96000km. Bought it in july 2001. travelled 200kms a week to work, major problems was the worn front castor bushes and busted stock clutch(what do you expect from 180rwkw@CAS) otherwise a great car. 100000km major service now due along with worn rear tyres.

How much did it cost to get these replaced and what difference if any did you notice after they had been replaced ?

G'day Ben,

I had the same problem. The factory castor rod bushes are filled with some sort of gell/fluid stuff and are prone to leaking.

Mine were picked up at the last wheel alighnment I had done.

I couldn't tell you if there was any handling improvement cause at that stage I went from the JIC coilovers to standard shocks with 25mm lower springs (hence why I got the alighmnet done :D ).

One thing I did notice was that it now has a slight squeak sometimes !

I think the cost was $120 for the parts and about $60 for fitting.

Cheers

J

I had the front bushes replaced in my car and noticed a difference in the turning response. It was a lot quicker and sharper. The stock ones were shot, had tears in them. I got the polyurathane ones (i think thats what they were made of) and they are a lot stiffer than the old ones.

I got mine a bit over 2yrs ago with 62 000k and just tonight clocked over 110 000k, the only problem I have had is the crank case seal went about 6 months ago otherwise perfect. That includes skidpan and track days, many runs down the 1/4 at willowbank and trips to Sydney from Brisbane. Been a great car so far.

Edit: Oh yeah forgot, had to do the caster bushes when I first got the car.

I bought mine with 101 000 on the clock and got the timing belt done. The mechanic said it was its first belt (becuase it was so shagged) so there is a good chance the km's are geniune. Now there is 123 000 ks on the clock. I have driven about 20 000ks in about 8 months, so my new years resoultion is to start catching the bus to work and leave the car at home to keep the ks down.

I also had to get the castor bushes replaced because they were leaking oil. Couldnt notice any handling difference because I only had the car a day when I got the work done.

Other problems with it were the clutch (general wear & tear I'd say) and a couple of exhaust manifold studs missing. Other than that, i think its a healthy RB20.

Changed the plugs a couple of days back (about 30 000ks old) and they seemed to be in pretty good condition (all had the same sort of wear).

/end rant

got it with 89,000kms, have now done 145,000kms..

only problem was the muffler which I replaced it when i first imported it...and just recently somethings shorting out in the steering column causing the indicators to go haywire (still to be fixed).

I bought my '33 with 74,000 on the clock (skeptical), now has 164,000. Only things that have gone wrong is the clutch (it just wore out) and the ECU stopped sending tacho signals, but otherwise worked perfectly?? The only problem with the engine is one lash adjuster seems to be worn so it has a light ticking noise occasionally, but otherwise it's been 100% reliable. I service it every 5,000km -7,500km with full synthetic oil and filters changed etc and treat it with mechanical sympathy, so that's gotta help longevity.

Seems a lot of people have had problems with the radius rod bushes tearing etc. (Just as I did) The mechanic told me when I had mine replaced that they quite often fail by 60,000kms.

Those of u that have replaced them, are u getting the stiffer ones or the stock ones from nissan.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...