Jump to content
SAU Community

'lost Birds' R33 Gtr


Recommended Posts

thanks guys. the work goes on. I've been really busy with the job, but I'm doing what I can to keep this moving. The seat rails came today, and I found out that the bride rails are great, but the mounting tabs provided with the kit won't cut it on the Prodrive seat. I'll have to fab some up in the future, and there were also 4 bolts missing from the kit.. great quality control.

DSC_0002.jpg

I love that it's a WRC seat. haha

DSC_0006-2.jpg

Link to comment
Share on other sites

Went out and bought some Air Intakes to replace the ARC box. More compact, and honestly there is no way the ARC box is more effective. I painted them black too. I'll get around to getting a hard pipe kit soon.

DSC_0004.jpg

DSC_0010.jpg

DSC_0012-2.jpg

DSC_0013-4.jpg

DSC_0019-2.jpg

Link to comment
Share on other sites

how much power are you putting out at the wheels mate? the stock airbox is surprisingly good and the arc box even more so. you wont get any benefit from the pods i rekon. also if you are sticking with the pod, dont get the hks type (the ones you have) they suck (hehe) at filtration. k&n or apexi works best

Link to comment
Share on other sites

how much power are you putting out at the wheels mate? the stock airbox is surprisingly good and the arc box even more so. you wont get any benefit from the pods i rekon. also if you are sticking with the pod, dont get the hks type (the ones you have) they suck (hehe) at filtration. k&n or apexi works best

at 1 bar, no cat, and unknown tune on my "MuKids" ECU I put down 230 KW to the wheels(surprising to me). You are right that these do not filter so well, but the condition of the ARC was very poor. I also didn't like how the main filter was pointed straight up at the hood. K&N will probably be my final choice, as they always have a top notch product. I might have stayed with the stock airbox, however, this car didn't come with it when I bought it. as far as Apexi goes, have a read at this

Intake Comparison

Link to comment
Share on other sites

oh god... "self destruct and find my way into the turbo" air filters. why? this build was so full of win up until that point.

lol, i didn't know people felt so strongly. haha. I won't be keeping them for too long. I just didn't want the ARC box, but maybe now I should reconsider?? I don't really drive the car around anyway as it's in pieces all the time. Also forgot to mention. I ordered a 90mm Kakimoto GT 1OZ exhaust. will be here thursday.

Edited by istdercollen
Link to comment
Share on other sites

lol i was just about to link you to that comparo. the arc filter pointing up would scream intake hole in the bonnet to me, but you have such a beautiful bonnet i'd hate to damage it and if the box is rooted then fair enough i guess.

Link to comment
Share on other sites

I just came across this thread - the car looks amazing! The proportions of the shapes and details are all brilliant as well - the execution certainly lives up to the original idea. It could have ended up looking terrible, but she's obviously got incredible creative talent as well as the patience to follow through with such an exhaustive task.

Reminds me a bit of the BMW Art Cars of the 80s and 90s. I also like how there are various features on the different panels too (like the Skyline word on the boot/trunklid) and not all just one type of detailing.

BMW Art Car 1

BMW Art Cars

Link to comment
Share on other sites

at 1 bar, no cat, and unknown tune on my "MuKids" ECU I put down 230 KW to the wheels(surprising to me). You are right that these do not filter so well, but the condition of the ARC was very poor. I also didn't like how the main filter was pointed straight up at the hood. K&N will probably be my final choice, as they always have a top notch product. I might have stayed with the stock airbox, however, this car didn't come with it when I bought it. as far as Apexi goes, have a read at this

Intake Comparison

I LOL! everytime when that article is posted.

SAU shit on about how shit the HKS filters are and yet some of the worlds fastest GTR's in Japan are using HKS filters.

As long as you clean them regularly and check the condition of the sponge filter material, you will be fine.

I clean mine at least twice between every 5000km's intervals.

Once at the start of the service, then clean again when the car has done 2500km's then when due for next service it is cleaned again.

The ARC Air box is similar to air pods, as the sponge filter is exposed, unless there is a cold air intake feeding air to it.

Since you have the twin pods on now, if I were you , I would find the stock R33 GTR air feed (the one that sits on top of the radiator) bolt it in and at least you will have a cold air intake.

Link to comment
Share on other sites

I had sponge filters... The previous owner never changed or cleaned them and they basically killed my turbos not long after I bought the car off him, took four years for it to happen! So yeah, I wouldn't be overly worried.

For the record, I now run a stock R32 airbox with a K&N filter and make 300awkW. ;)

Link to comment
Share on other sites

okay, well then I will leave them for now, but i need to make fab something to keep the heat away I reckon.

got the Kakimoto Racing GT 1 OZ installed. 90mm titanium piping hooked up to a stainless steel canister. weighs about 7kg!

DSC_0006-3.jpg

Progression video once more.

Weight update...

Removed rear seat and rear seat safety belts for 31 pound/14.1kg reduction.

Stock Trunk Carpeting - 11.5lbs/5.2kg

Stock Floor Mats - 13.0lbs/5.9kg!!

Stock Jack/Tire Iron - 4.5lbs/2.05kg

Stock Spare Tire - 34.4LBSSSS/15.6kg

Nissan Air Purifier,sound deadening behind back seat, car jack - 9 lbs/4.1kg

metal plate behind the back seat - 6.4 pounds/2.9kg

Stock suspension 57.8lbs/26.3kg and HKS Hipermax 47.0/32.3kg - 10.8lbs/6kg net loss

door panels 14lbs/6.35kg

carpet and various pieces of plastic 16.2/7.3kg

Center console 7.6lbs/3.5kg

passenger seat 34lbs/15.4kg (with rail attached)

Difference in test pipe/cat 6lbs/2.7kg

new seat/rail vs old seat/rail 5lbs/2.3kg

dash stripped to shell - 3lbs/1.36kg

difference in exhausts 24.2lbs/11kg

=

230.6 pounds/104.8kgs

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...