Jump to content
SAU Community

Recommended Posts

You can buy them from nissan, i have them in the shed if you want the part numbers. But you back yarders should be putting vaso on your engines so them come out easier for you, see you pull them so much hehe.

This one is coming out and going in the bin AKA the for sale section... :P

I'm going something a little different to my normal setup... Which means I'm starting from scratch and binning the lot...

  • 2 weeks later...

So... I always thought transformers was just a bit of sci-fi... Turns out it isn't... My R33 went 300ZX...

71749_1563476481373_1069171597_31638418_120212_n.jpg

73116_1563476801381_1069171597_31638419_2614546_n.jpg

69809_1563477241392_1069171597_31638420_4189413_n.jpg

72507_1563477721404_1069171597_31638422_1599858_n.jpg

And going on holidays overseas has now thrown a spanner in the works again with this project...

  • 4 months later...

Rb30 bottom ends arent worth much. You can strip and sell if you want. For the run around with getting everything to you lol.

When's it going in? Engine and box mounts will be made when I take the car to Brad.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...