Jump to content
SAU Community

Recommended Posts

Was tossing up between the cube and the golf for cheap shitty daily that I could give some epic stance.

Cube 12k purchase price with hookups, almost $6k in mods ($2k for airbag suspension, $1.5k wheels, $1k paint, panels and parts, $1k stereo, tint n all the wanky shit).

Golf $5k plus $6k = 11k which is under the purchase price of a cube. Cube is 2003 model, Golf is 2002. meh, still much more modern and reliable than a clunker of a skyline.

scroll down ya lazy kent there 1k

can you get your mate to measure the centre bore for me on those wheels, might try and wrangle em onto the golf with PCD adapters.

actually... FFFFUUU they're 17's. He can really suckadick asking even 1k for 17's.

finished installing the fuel setup on the ke70.... just need to neaten it up and put some padding under the pump to shhhh it a lil

2lt surge tank, lift pump and 044 out of leigh pidwell's 260rwkw SR powered KE....

think it'll handle my n/a 100rwkw? :P

med_gallery_36777_3194_494156.jpg

lol funky.. yeh 17s are fine man lets u go more low.. fkn old schoolers

on a gold id be rockin negative offset 15s

post pics of 5k purchase pls

might just get these instead... should come to about $800 delivered at the current bid.

hinanagisa-img600x450-1268705599gzsxvp52446.jpg

18x8.5 and 18x9.5 both +45 offset. 8.5 +20 offset gives flushness with the body on a golf, so by my calculations, if I add a 25mm hub PCD converter, it should let me clear struts arms etc, and push it out an inch, which I can then tuck in using some guard rolling/flaring and some camber.

lol actually i dunno what it looks like. I just gave money to my mate Roshan that runs Driftline and told him to snap one up that comes up at the shops or customer cars or whatevers... money talks, they are worth at least $9000 but hard to say no to cold hard instant cash.

finished installing the fuel setup on the ke70.... just need to neaten it up and put some padding under the pump to shhhh it a lil

2lt surge tank, lift pump and 044 out of leigh pidwell's 260rwkw SR powered KE....

think it'll handle my n/a 100rwkw? :P

med_gallery_36777_3194_494156.jpg

Fucking NICE!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...