Jump to content
SAU Community

Recommended Posts

^lol

noob q- how do i know if i have a hicas lock bar, let alone the hicas. previous owner said it was removed or someshit. stand outside the car and get someone to turn the wheel?

^lol

noob q- how do i know if i have a hicas lock bar, let alone the hicas. previous owner said it was removed or someshit. stand outside the car and get someone to turn the wheel?

Travel at 100km/h then violently swerve. If you plough into a tree, you have hicas.

  • Like 3

^lol

noob q- how do i know if i have a hicas lock bar, let alone the hicas. previous owner said it was removed or someshit. stand outside the car and get someone to turn the wheel?

look under the rear of the car near where the diff etc is....You'll either have a Hicas system there, or a steel bar

  • Like 1

^lol

noob q- how do i know if i have a hicas lock bar, let alone the hicas. previous owner said it was removed or someshit. stand outside the car and get someone to turn the wheel?

hicas is not the same as honda preludes 4wheel steer you noob.

Hicas only moves +/- 1 degree at speeds over 80km/h

If you see a bar like this, then the hicas has been removed and replaced with the bar.

302-hicas_bar_installed.jpg

Mohsen bet you copped a good lecture from your old man ey? lol

if you're not bothered with more studying (not that you studied anyway with an ENTER like that) and are thinking of getting into a trade then do so asap. dont waste time, the earlier you start the better for you. i wasted 3.5 years at uni for nothing but meh live and learn

yeh i just dont think its worth it and if things stay as they are will be some bargains next year for suree. Yeh i dont dig convertibles usually but a hardtop convertible how could you say no!

c63 is the bomb but talkin 115k if your lucky more like 130k cant justify it

are you serious? 335i e93 is about 120k new to get into entry level M your talking 150K plus i dont know how your comparing. a second hand m3 is still about 120k a 335 for 50k less is a good deal.

for 70K you can get a a mint condition e46 m3 with very low Ks and have enough change to supercharge it. non M bimmers are too grnadpa spec but thats just my opinion.

awesome, thanks pat.

i gots hicazzzzz

grant, hell yeah, i beat lamborghinis and shit

rimon- nah man my dad doesnt care, just havnt told my mum yet lol

Edited by Mohsen

i got 42.80 for my ENTER score :laugh: Most of year 11 and 12 was spent fucking around. Decided to do a trade, and haven't looked back, and I earn the same as my brother, who is an economist and has done 2 degrees. The money is there to earn.

i got 42.80 for my ENTER score :laugh: Most of year 11 and 12 was spent fucking around. Decided to do a trade, and haven't looked back, and I earn the same as my brother, who is an economist and has done 2 degrees. The money is there to earn.

i got 45.4 i win! and i got into a course that required a 91.8 ENTER. my mate with 12.5 got into architecture at the same uni lol

we knew we were in even before we actually did the exams, hence why we didnt bother. everyone in the library studying while we're playing soccer in the courts hahaha good times

i got 45.4 i win! and i got into a course that required a 91.8 ENTER. my mate with 12.5 got into architecture at the same uni lol

we knew we were in even before we actually did the exams, hence why we didnt bother. everyone in the library studying while we're playing soccer in the courts hahaha good times

we were busy chasing slappers and doing kebab runs haha

hey grant, get those pods off?

am free sundayyyyyy

Edited by Mohsen

i got 45.4 i win! and i got into a course that required a 91.8 ENTER. my mate with 12.5 got into architecture at the same uni lol

we knew we were in even before we actually did the exams, hence why we didnt bother. everyone in the library studying while we're playing soccer in the courts hahaha good times

Haha I win! 63.95 and I didn't study for ANY exams. My course is a high 80% course

Mohsen bet you copped a good lecture from your old man ey? lol

if you're not bothered with more studying (not that you studied anyway with an ENTER like that) and are thinking of getting into a trade then do so asap. dont waste time, the earlier you start the better for you. i wasted 3.5 years at uni for nothing but meh live and learn

for 70K you can get a a mint condition e46 m3 with very low Ks and have enough change to supercharge it. non M bimmers are too grnadpa spec but thats just my opinion.

What did you study bloke? And what are you doing now?

I'm in a similar boat. Finished my degree last year and im travelling to europe next year but was thinking of doing a trade myself. Worried i'll be too old at 24 though haha.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...