Jump to content
SAU Community

Recommended Posts

what did he do that was worth 500?

Removed old gearbox. Installed new gearbox, clutch kit, lightened flywheel, replaced shifter cables and speedo sender.

New driveshaft boots.

Oil leak fixed + oil change (including gbox)

And some other stuff which I can't remember :P Will check the receipt later. Fair bit of work for $500, which is what some other mechs have charged me for like 4 hours work.

Edited by jezza boii

imo, cars wit that much poke look good from that angle.. that is all

ridiculous from the back, ridiculous form the front.

says the habib rolling in a sedan with hobo spec suspension.

and by hobo spec, I mean when you park the car at night, hobos climb in the gap between your wheel and fender for shelter.

Fair bit of work for $500, which is what some other mechs have charged me for like 4 hours work.

usual rate is about $25 an hour, so he spent 3 full days working on your car?

says the habib rolling in a sedan with hobo spec suspension.

and by hobo spec, I mean when you park the car at night, hobos climb in the gap between your wheel and fender for shelter.

usual rate is about $25 an hour, so he spent 3 full days working on your car?

Usual rate? Lol you need to check a shop that isn't your cousins. It's sometimes double that

any mehanic/tuner I use charges a std rate of at least $100 per hour (doesn't mean i pay that, but it's what they charge)

And Femno charges me around $40 an hour. I think shan is loosing his marbles cuz he seems to be posting crap (more than usual) these days haha

haha yeh depends on the house, location and most of all the sellers motivation. If you see somethign you like link me i may have a contact within the agency selling it to get you a no bs idea on where its at.

yeh that happens out east and inner west a fair bit its bs its all private sale where i am thankfully - much easier for buyer /seller. You can grab a bargain at auction though particurarly when the market is favouring buyers like now.

cheers bro. The ones ive got my eyes on are all auctions so will have an idea of the pricing once the bidding war starts. First one this Sunday, so we'll see how it plays out haha

Well my mechanic tried to spin both wheels. The left one spun. The right didn't.

Turns out the handbrake was on BUT wasn't functioning on the left side so he got confused.

awesome mechanic :down:

+1 too much poke.... but i'd also like to see a lil tyre on the lexus....

showing a little tyre is needed imo

also awesome firework

http://www.youtube.com/watch?v=m95mvMVGQ-0

  • Like 1

car sounds pretty mangled

other than your sig what is wrong?

Not much. Well other than the hilarious sig, the fact they have to get it to run with a piggyback ECU. But it's safe to say 99.9% of the issues are actually electrical in one form or another. I guess I'm just looking for someone who understands that wires carry electricity and as long as they carry it to whatever sensor is looking for what, it should be OK.

Apparently 'tis not that simple.

any mehanic/tuner I use charges a std rate of at least $100 per hour (doesn't mean i pay that, but it's what they charge)

My local guy is $50 according to my last bill ;)

I take everything i need for service/want changed. Pick it up the same day. Works out well.

Guy works with a lot of race teams and is in Europe a lot, was @ bathurst 12hr for instance :D

Good that I've finally found someone that i can trust locally AND clearly knows what he is talking about

Obviously still get Chris to do the major stuff. But general service type of thing, cant go wrong and it saves me 1.5hrs on trains + the drive there/back etc over 2 days.

lol classy..

jersey shore sounds queer

that dude in man vs wild is a f**king machine!

nah good show...

bear grylls enjoys drinking/bathing in his own urine way too much

haha that's f**kin sick

Apparently dtf originated from superbad. Either way, I'm making dtf shirts if anyone wants em :P

Original

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...