Jump to content
SAU Community

Recommended Posts

moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem moh jem moe jem mo jem

ya'll get te point

I'm terrified of heights. Kris and his brother made me go :P

I instantly regretted giving in :P

i'm terrified of heights too..

what i do is man up and go for it, once they lock you in, there's nothing more you can do except scream!

Was at Surfers Paradise for Easter. Good Fun

0 - 100km/h in 2 seconds (Superman rollercoaster)

No car can achieve that feeling :(

Brilliant ride. I find that lethal weapon is the most 'unnerving' ride out of all the parks. Hanging buy your ass as you climb up to the first drop.

Haven't been on superman but apart from that pretty much every ride across all of those parks are kiddie rides compared to the stuff at six flags in Cali.

I've never been a rollercoaster person, and went to six flags the day after a big night of drinking, but I went on everything there at least twice. They have the batman which is the same as the lethal weapon, and it's pretty much the tamest roller coaster there.

YouTube Goliath and tatsu, that's where it's at.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...