Jump to content
SAU Community

Recommended Posts

So I have finally booked the GTR in to get the PT6262 fitted.
I will finally have my own results to post in here..

Not chasing a power figure, will be adding new Cams, Cam Gears, Fuel system & ECU
starting out on 20psi and see how it all goes.

Going in my 34 GTR
6 boost Manifold, 50mm Progate & 6262 with .84
Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD
New fuel system & some cams, cam gears and a few other bits and pieces.
Will post up a before & after run, looking forward to having a bit more power.

Going in my 34 GTR

6 boost Manifold, 50mm Progate & 6262 with .84

Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD

New fuel system & some cams, cam gears and a few other bits and pieces.

Will post up a before & after run, looking forward to having a bit more power.

Capacity?

Comp ratio?

Cams?

Exhaust size?

Going in my 34 GTR

6 boost Manifold, 50mm Progate & 6262 with .84

Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD

New fuel system & some cams, cam gears and a few other bits and pieces.

Will post up a before & after run, looking forward to having a bit more power.

Why the PS2000 and not the Platinum Pro plug-in?

Found this from Jan 25th 2013.

 

Car is 2001 Audi A4 1.8T

 

New 6262 CEA 620rhp @ 42psi (red)

Old  6262         520rhp @ 35psi (blue)

5857                420rhp @ 28psi (green)

Err, no? The different colours are hp, torque and boost, it's just a new 6262 versus and old 5857 in that comparison.

Capacity?

Comp ratio?

Cams?

Exhaust size?

Capacity: 2.6L

Comp ratio: Standard

Cams: HKS step 1's 272 8.7 lift (I think)

Exhaust: 4" dump into custom 3.5" exhaust with no mufflers

Will be tuned on E85 from the drum, the car is not my daily anymore and for $2,50/L I don't have to worry about watching the fuel prices jump up and down.

Why the PS2000 and not the Platinum Pro plug-in?

Because I'm not sticking with RB26 and don't wanna upgrade ECU's again.

Will utilize some of the additional channels from the PS2000 in the future.

A couple of people have also asked why the Logger IQ3, it's for same reason. buying now to setup so I don't have to replace in the future.

My aim is just to have a bit more poke when I press the accelerator down, I'm not chasing a power figure nor am I looking for a world record.

  • 2 weeks later...

My r34 gtr came back from Micks Motorsport making 501AWKW 671AWHP on 28 psi on united e85 with a precision 6766 bb and on bp 98 it made 370AWKW 495AWHP 20 psi

the engine is currently a Nitto 2.7 stroker ,ported head a set of 270 deg cams, Precision 6766 and a Turbosmart hyper gate we will push for more soon, will put a graph up when I go to the workshop the motor was built buy Dahtone Racing

  • Like 1

So I have finally booked the GTR in to get the PT6262 fitted.

I will finally have my own results to post in here..

Not chasing a power figure, will be adding new Cams, Cam Gears, Fuel system & ECU

starting out on 20psi and see how it all goes.

im a bit surprised actually I thought this car was a pretty serious piece of top dollar machinery already. any reason you decided on the precision?

im a bit surprised actually I thought this car was a pretty serious piece of top dollar machinery already. any reason you decided on the precision?

Hmm

Nah, my car is factory stock still. Only mod is the Fat Pipes exhaust.

I went precision to be different, turns out plenty of others have gone down the same road since this thread is 87 pages now.

Got a roller bearing 6262 to go on a mates 25/30 and it doesn't seem to spin as freely by hand as the GT35's I've had in the past. It actually hardly spins at all when idling. Is this normal or is there an issue somewhere

i have only ever seen this on BIG turbos as the air is passing past the turbo but not enough to spin it. Was on a 2J. I am 100% certain this isnt the issue here tho.

Got a roller bearing 6262 to go on a mates 25/30 and it doesn't seem to spin as freely by hand as the GT35's I've had in the past. It actually hardly spins at all when idling. Is this normal or is there an issue somewhere

That's strange, can you show us a video?

JEM tuned a 33 GTR the other week.

RB26+6466+E85+35psi=604awkw.

So it was a 6466!? I saw the pic and figured it might have been a 6466 or 6766 but I got no response when I asked - I *love* 6466, they are clearly an awesome turbo. Any word on how it spools on the RB26? Should beg JEM for a dyno plot post, it would be very very interesting

So it was a 6466!? I saw the pic and figured it might have been a 6466 or 6766 but I got no response when I asked - I *love* 6466, they are clearly an awesome turbo. Any word on how it spools on the RB26? Should beg JEM for a dyno plot post, it would be very very interesting

:dry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...