Jump to content
SAU Community

Recommended Posts

So I have finally booked the GTR in to get the PT6262 fitted.
I will finally have my own results to post in here..

Not chasing a power figure, will be adding new Cams, Cam Gears, Fuel system & ECU
starting out on 20psi and see how it all goes.

Going in my 34 GTR
6 boost Manifold, 50mm Progate & 6262 with .84
Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD
New fuel system & some cams, cam gears and a few other bits and pieces.
Will post up a before & after run, looking forward to having a bit more power.

Going in my 34 GTR

6 boost Manifold, 50mm Progate & 6262 with .84

Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD

New fuel system & some cams, cam gears and a few other bits and pieces.

Will post up a before & after run, looking forward to having a bit more power.

Capacity?

Comp ratio?

Cams?

Exhaust size?

Going in my 34 GTR

6 boost Manifold, 50mm Progate & 6262 with .84

Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD

New fuel system & some cams, cam gears and a few other bits and pieces.

Will post up a before & after run, looking forward to having a bit more power.

Why the PS2000 and not the Platinum Pro plug-in?

Found this from Jan 25th 2013.

 

Car is 2001 Audi A4 1.8T

 

New 6262 CEA 620rhp @ 42psi (red)

Old  6262         520rhp @ 35psi (blue)

5857                420rhp @ 28psi (green)

Err, no? The different colours are hp, torque and boost, it's just a new 6262 versus and old 5857 in that comparison.

Capacity?

Comp ratio?

Cams?

Exhaust size?

Capacity: 2.6L

Comp ratio: Standard

Cams: HKS step 1's 272 8.7 lift (I think)

Exhaust: 4" dump into custom 3.5" exhaust with no mufflers

Will be tuned on E85 from the drum, the car is not my daily anymore and for $2,50/L I don't have to worry about watching the fuel prices jump up and down.

Why the PS2000 and not the Platinum Pro plug-in?

Because I'm not sticking with RB26 and don't wanna upgrade ECU's again.

Will utilize some of the additional channels from the PS2000 in the future.

A couple of people have also asked why the Logger IQ3, it's for same reason. buying now to setup so I don't have to replace in the future.

My aim is just to have a bit more poke when I press the accelerator down, I'm not chasing a power figure nor am I looking for a world record.

  • 2 weeks later...

My r34 gtr came back from Micks Motorsport making 501AWKW 671AWHP on 28 psi on united e85 with a precision 6766 bb and on bp 98 it made 370AWKW 495AWHP 20 psi

the engine is currently a Nitto 2.7 stroker ,ported head a set of 270 deg cams, Precision 6766 and a Turbosmart hyper gate we will push for more soon, will put a graph up when I go to the workshop the motor was built buy Dahtone Racing

  • Like 1

So I have finally booked the GTR in to get the PT6262 fitted.

I will finally have my own results to post in here..

Not chasing a power figure, will be adding new Cams, Cam Gears, Fuel system & ECU

starting out on 20psi and see how it all goes.

im a bit surprised actually I thought this car was a pretty serious piece of top dollar machinery already. any reason you decided on the precision?

im a bit surprised actually I thought this car was a pretty serious piece of top dollar machinery already. any reason you decided on the precision?

Hmm

Nah, my car is factory stock still. Only mod is the Fat Pipes exhaust.

I went precision to be different, turns out plenty of others have gone down the same road since this thread is 87 pages now.

Got a roller bearing 6262 to go on a mates 25/30 and it doesn't seem to spin as freely by hand as the GT35's I've had in the past. It actually hardly spins at all when idling. Is this normal or is there an issue somewhere

i have only ever seen this on BIG turbos as the air is passing past the turbo but not enough to spin it. Was on a 2J. I am 100% certain this isnt the issue here tho.

Got a roller bearing 6262 to go on a mates 25/30 and it doesn't seem to spin as freely by hand as the GT35's I've had in the past. It actually hardly spins at all when idling. Is this normal or is there an issue somewhere

That's strange, can you show us a video?

JEM tuned a 33 GTR the other week.

RB26+6466+E85+35psi=604awkw.

So it was a 6466!? I saw the pic and figured it might have been a 6466 or 6766 but I got no response when I asked - I *love* 6466, they are clearly an awesome turbo. Any word on how it spools on the RB26? Should beg JEM for a dyno plot post, it would be very very interesting

So it was a 6466!? I saw the pic and figured it might have been a 6466 or 6766 but I got no response when I asked - I *love* 6466, they are clearly an awesome turbo. Any word on how it spools on the RB26? Should beg JEM for a dyno plot post, it would be very very interesting

:dry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...