Jump to content
SAU Community

Recommended Posts

So I have finally booked the GTR in to get the PT6262 fitted.
I will finally have my own results to post in here..

Not chasing a power figure, will be adding new Cams, Cam Gears, Fuel system & ECU
starting out on 20psi and see how it all goes.

Going in my 34 GTR
6 boost Manifold, 50mm Progate & 6262 with .84
Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD
New fuel system & some cams, cam gears and a few other bits and pieces.
Will post up a before & after run, looking forward to having a bit more power.

Going in my 34 GTR

6 boost Manifold, 50mm Progate & 6262 with .84

Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD

New fuel system & some cams, cam gears and a few other bits and pieces.

Will post up a before & after run, looking forward to having a bit more power.

Capacity?

Comp ratio?

Cams?

Exhaust size?

Going in my 34 GTR

6 boost Manifold, 50mm Progate & 6262 with .84

Haltech PS2000 ECU & IQ3 Logger dash to replace the MFD

New fuel system & some cams, cam gears and a few other bits and pieces.

Will post up a before & after run, looking forward to having a bit more power.

Why the PS2000 and not the Platinum Pro plug-in?

Found this from Jan 25th 2013.

 

Car is 2001 Audi A4 1.8T

 

New 6262 CEA 620rhp @ 42psi (red)

Old  6262         520rhp @ 35psi (blue)

5857                420rhp @ 28psi (green)

Err, no? The different colours are hp, torque and boost, it's just a new 6262 versus and old 5857 in that comparison.

Capacity?

Comp ratio?

Cams?

Exhaust size?

Capacity: 2.6L

Comp ratio: Standard

Cams: HKS step 1's 272 8.7 lift (I think)

Exhaust: 4" dump into custom 3.5" exhaust with no mufflers

Will be tuned on E85 from the drum, the car is not my daily anymore and for $2,50/L I don't have to worry about watching the fuel prices jump up and down.

Why the PS2000 and not the Platinum Pro plug-in?

Because I'm not sticking with RB26 and don't wanna upgrade ECU's again.

Will utilize some of the additional channels from the PS2000 in the future.

A couple of people have also asked why the Logger IQ3, it's for same reason. buying now to setup so I don't have to replace in the future.

My aim is just to have a bit more poke when I press the accelerator down, I'm not chasing a power figure nor am I looking for a world record.

  • 2 weeks later...

My r34 gtr came back from Micks Motorsport making 501AWKW 671AWHP on 28 psi on united e85 with a precision 6766 bb and on bp 98 it made 370AWKW 495AWHP 20 psi

the engine is currently a Nitto 2.7 stroker ,ported head a set of 270 deg cams, Precision 6766 and a Turbosmart hyper gate we will push for more soon, will put a graph up when I go to the workshop the motor was built buy Dahtone Racing

  • Like 1

So I have finally booked the GTR in to get the PT6262 fitted.

I will finally have my own results to post in here..

Not chasing a power figure, will be adding new Cams, Cam Gears, Fuel system & ECU

starting out on 20psi and see how it all goes.

im a bit surprised actually I thought this car was a pretty serious piece of top dollar machinery already. any reason you decided on the precision?

im a bit surprised actually I thought this car was a pretty serious piece of top dollar machinery already. any reason you decided on the precision?

Hmm

Nah, my car is factory stock still. Only mod is the Fat Pipes exhaust.

I went precision to be different, turns out plenty of others have gone down the same road since this thread is 87 pages now.

Got a roller bearing 6262 to go on a mates 25/30 and it doesn't seem to spin as freely by hand as the GT35's I've had in the past. It actually hardly spins at all when idling. Is this normal or is there an issue somewhere

i have only ever seen this on BIG turbos as the air is passing past the turbo but not enough to spin it. Was on a 2J. I am 100% certain this isnt the issue here tho.

Got a roller bearing 6262 to go on a mates 25/30 and it doesn't seem to spin as freely by hand as the GT35's I've had in the past. It actually hardly spins at all when idling. Is this normal or is there an issue somewhere

That's strange, can you show us a video?

JEM tuned a 33 GTR the other week.

RB26+6466+E85+35psi=604awkw.

So it was a 6466!? I saw the pic and figured it might have been a 6466 or 6766 but I got no response when I asked - I *love* 6466, they are clearly an awesome turbo. Any word on how it spools on the RB26? Should beg JEM for a dyno plot post, it would be very very interesting

So it was a 6466!? I saw the pic and figured it might have been a 6466 or 6766 but I got no response when I asked - I *love* 6466, they are clearly an awesome turbo. Any word on how it spools on the RB26? Should beg JEM for a dyno plot post, it would be very very interesting

:dry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...