Jump to content
SAU Community

Recommended Posts

I know it's the shittest pic in the world but this should give you an idea of 6262 power potential. We ran it up at just under 2 bar (1.96 I believe) and it went 710rwhp (530rwkw) and 776Nm.

Stock bottom end RB26 with 1.2mm head gasket and Grex 9.1mm cams

20131003_173129_zps562ef6cf.jpg

I know it's the shittest pic in the world but this should give you an idea of 6262 power potential. We ran it up at just under 2 bar (1.96 I believe) and it went 710rwhp (530rwkw) and 776Nm.

Stock bottom end RB26 with 1.2mm head gasket and Grex 9.1mm cams

Fark! :blink:

Still running the 1200cc injectors or have you upgraded?

I know it's the shittest pic in the world but this should give you an idea of 6262 power potential. We ran it up at just under 2 bar (1.96 I believe) and it went 710rwhp (530rwkw) and 776Nm.

Stock bottom end RB26 with 1.2mm head gasket and Grex 9.1mm cams

20131003_173129_zps562ef6cf.jpg

Why do you post this result you will destroy my wallet!!!

Holy molah!

*chucks the twins in the bin*

I know right hahaha

I know it's the shittest pic in the world but this should give you an idea of 6262 power potential. We ran it up at just under 2 bar (1.96 I believe) and it went 710rwhp (530rwkw) and 776Nm.

Stock bottom end RB26 with 1.2mm head gasket and Grex 9.1mm cams

Awesome result man :D Got to be happy with that, had no doubt that a 6262 would make that kind of power but still cool to see somewhere here throw it down in a GTR along with a decent power delivery :) Going to be an animal!

I am rapt that people in Oz are embracing these (Precision CEA and FP HTA turbos), I wish people in NZ would join this decade too :(

I have been prattling on about them for YEARS, and just get chortled at like people think it is inflated dyno results or whatever. Had a bit of that a few years ago on this forum but now it's the new black.

  • Like 1

Its a damn good result and to be honest that dyno figure would be quite conservative as well.

We get the 200SX tuned by Yavuz and at about 430rwkw i have run 137mph at Eastern Creek in complete street trim. I am talking stereo and all, so with a 484rwkw your most certainly going to be running into the 9's at over 140mph

I am really looking forward to seeing what the 6766 twin scroll does on our car now. I got a 1.0 rear so it will be interesting to see just how responsive it will be

With regard to traction, throw a couple of washers on top of the diff mounts and point the nose of the diff down ie between the diff and cradle. Made a pretty massive difference to the car after we did that. I know it can be fun to drive without them, but nothing beats being pinned back into the seat and not being able to move :)

My main thing was that i wanted it be strictly streetable and wasnt fussed about the dyno figure - not that its too bad at all! Therefore I went for a 6466 with .84 twin scroll - I was concerned this would be too big as I was thinking to go for a 6266 originally - although very happy with this setup which is super responsive compared to most cars I have been in, not to mention torquey-as down low due to the RB30.

It has been running for some time on 13psi run in tune which it did 308rwkw on pump 98 - then 20psi on e85 which it did 365rwkw for about 2 weeks.

Even on 20 psi the car is a wild drive on the streets - stepping out in 4th gear once is hits about 4000rpm as if it was second gear (still waiting on half decent tyres to show up).

If I upgrade the catch can (which is small as I wanted it to be hidden) they could push 34psi but doubt I will ever need to, nor bother going to the troubble as this thing has been in the making for over a year now!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...