Jump to content
SAU Community

Recommended Posts

so i did the coke can mod tonight and seemed to get rid of the farting issue... How bad is it not having the blowoff functioning? Should i look into the grub screw mod?

There is mechanism why it may not be good..

But its pseudoscience at best no one really knows and there are many people on either side of the fence... Personally i have never run them in any of my drift cars. 20+ psi. Had no dramas.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6321758
Share on other sites

yeah well we purposely never ran one on the CTS Drift Car as we found it held the boost better that and the fact it was one less part we had to worry about failing. But i was just worried on a stock car such as these it might have some issues. i guess ill wait n see...haha

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6321888
Share on other sites

  • 2 months later...

Docile... that was not problem when I did that mod.

I found it good when on of off the throttle but when cruising on the Highway at 115kmh it tended to stutter and was very uncomfortable. Had to stop on the trip to remove the grub screw. Fortunatley it only takes 5 minutes to remove.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6430199
Share on other sites

Did the coke can mod. Very straight forward.

Great results; eliminated the farting, seems to be slightly more responsive, got the fully sick VL flutter sound which is manageable. Certainly turns heads when people look that it is a wagon.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6434040
Share on other sites

As Andy mentioned, wait till you take it on the highway. Drives like a dog.

I'm not exactly sure what the fix is... but once I changed the intake and tuned it with the E-Manage I no longer get the farting... Have been driving it around for about a year with no issues.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6437284
Share on other sites

As Andy mentioned, wait till you take it on the highway. Drives like a dog.

I'm not exactly sure what the fix is... but once I changed the intake and tuned it with the E-Manage I no longer get the farting... Have been driving it around for about a year with no issues.

Thanks for the heads up. So far had it cruising at 90kmh at constant speed, seemed quite ok, will see how it goes over 100kmh.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6437380
Share on other sites

Take it on a long hill and when you try and maintain a steady speed. When you ever so slightly back off the car will begin the shudder.

It drove me nuts. That and the stupid sound. Would be fine if it was a 1000kw beast... but its a wagon... with alot less power.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6437929
Share on other sites

Take it on a long hill and when you try and maintain a steady speed. When you ever so slightly back off the car will begin the shudder.

It drove me nuts. That and the stupid sound. Would be fine if it was a 1000kw beast... but its a wagon... with alot less power.

Took it for a drive today across Melbourne (Moorabbin to Geelong and back). Kept it steady at intervals of 90kmh, 100kmh, 115kmh and 120kmh. If you are steady on the throttle, not like a taxi drive on/off, I could not fault it.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6439069
Share on other sites

Took it for a drive today across Melbourne (Moorabbin to Geelong and back). Kept it steady at intervals of 90kmh, 100kmh, 115kmh and 120kmh. If you are steady on the throttle, not like a taxi drive on/off, I could not fault it.

Have to agree. I ran mine with the grub screw for many 10's or thousands of kms on highway, never an issue.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6440190
Share on other sites

My car has the super hectik vl fluttaz, but I can't work out why. I just assumed it was an a/m bov, and never got round to looking at it.....until my turbo blew.

I've pulled the BOV off and checked all the lines to make sure someone hadn't blocked them for teh fluttaz. Do the BOV's fail very often?

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6440239
Share on other sites

My car has the super hectik vl fluttaz, but I can't work out why. I just assumed it was an a/m bov, and never got round to looking at it.....until my turbo blew.

I've pulled the BOV off and checked all the lines to make sure someone hadn't blocked them for teh fluttaz. Do the BOV's fail very often?

My std BOV did similar, [fully hectic sound included] annoyed the crap out of me and made the car surge on light throttle transitions I took it off to check it out. Ended up having a ruptured diaphragm, I replaced it with std BOV off another VQ25det and the problem was solved, driving the car was so much better.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6440307
Share on other sites

now just wondering whether to keep it or put on a new stock BOV as I do not want to kill the turbo.....

I replaced mine with a Turbosmart Dual Port. Theo has the same one, and Scotty has a Turbosmart Kompact. Little bit of flutter but if you're smooth it's hardly noticable.

I didn't like the idea of replacing one BOV having issues with a second hand one when they're all prone to doing this.

Link to comment
https://www.sau.com.au/forums/topic/327936-m35-bov/page/5/#findComment-6440587
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...