Jump to content
SAU Community

Recommended Posts

I wonder what Cliff is up to now..... running a muck on the mean streets of Lisboa I am guessing, he did learn from the best on that trip.

I still have a bit to do looking forward to getting back working on it. I am just going to hook up the Defi guages I have for monitoring for now - its a bit street racer but hey it tells me when things are good / bad and the buzzers will get my attention.

Also need to sort brakes out, finish off a few things, and have also somewhat overlooked managing heat so want to do some stuff with that.

I was quite tempted by an S6 RX7 roller that came up recently, not sure why but always loved the look of those things.

Picked the car up yesterday. Unfortunately I wasn't able to drive it due to a leaky brake line I grabbed from wreckers as a temporary measure.

Dyno chart shows normal tune (032) and against the final tune (039) after backing it off a bit for the track.

Dyno-combined_zpsf94a0c0f.jpg

The final tune against boost. Still sitting slightly under 20psi so the motor is definitely a good thing for what it is making on 98. Chris said the way it ramps onto boost is ideal as well rather than an initial spike which engines don't like.

Dyno-final_zps2dabd40a.jpg

Just another gratuitous shot.

IMG_1665_zps29cd9657.jpg

  • Like 2

Hey Paul

she looks fantastic mate. She is almost like a twin to my beast. I am still waiting on the new motor for mine. No idea where its at as the crank shaft was delayed.

330kW looks great. my other engine was running 309kW before it popped. I thought 309 was awesome power......

We will have to meet up at a track day in melbourne when I get my engine back.

Cheers Evan for sure! Replaced the leaky brake line yesterday and took it for the maiden voyage - temp permit all legal of course. Lot's of fun up to 80km/h - looking forward to giving it a hiding on the track that's for sure.

  • 4 weeks later...

Super fun happy time!!!!!!! :action-smiley-069:

Where rotors at..........?????? Size...

So so so keen to see this in the flesh Paul

Ha! I have about 5 pairs of ex v8 supercar rotors waiting in the wings from before this damn car of the future stuff where they changed the diameter to ~395mm.

They are 375mm x 36mm when new - you could get them down here second hand for ~$200-$300 / pair but supply has dried up (I took everything they had left!). I have a few pairs that are virtually brand new with half a mm of wear - from test days or something.

I already have the working setup on my 34, just need to get new hats and dog bones made up. Before I do that I am going to swap the setup over, but using these calipers and make sure it all works happily before we go getting drawings made up and CNC machines out.

  • Like 1

What brakes are coming off the car?

Just a pair of stocky Sumitomo's on loan with makeshift brake lines!

Rears are standard as well at the moment but recently rebuilt with good pads, slotted rotors and lines, they may stay put as silly as they look. My advisers tell me that they may do the job better than an aftermarket kit so I am out to test that notion.

  • 3 weeks later...

What a fantastic build! I'm loving your attention to detail :-). I'm doing a 32gtr build myself. I'm wondering what oil pump you are using in the engine build? Cheers

Cheers. It's a tomei oil pump but Racepace modify it a bit to get the right oil pressure for the build.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...