Jump to content
SAU Community

Rb26 Into A Vs Commodore

Craig97

By Craig97,
in General Automotive Discussion

 Share

Recommended Posts

Craig97 Newbie

Craig97

Posted
Posted

Hey there,

Im looking for some advice. I have a VS Commodore which i no longer drive anymore and im looking seriously at putting an RB26DETT into it. For the time being i would want it to be pretty close to stock with a manual gearbox. My main questions are:

1. What will i need other than a front cut?

2. I have seen an RB25 in VS, is there much difference?

3. Who would be a reputable workshop to do this type of work?

Thanks for your help.

Link to comment
https://www.sau.com.au/forums/topic/329212-rb26-into-a-vs-commodore/
Share on other sites
Mandingo Proficient

Mandingo

Posted
Posted (edited)

1. custom engine mounts, crossmember, gearbox mount, tailshaft, upgraded diff, suspension, brakes, wiring IE Everything on a commodore.

2. yes. alot of difference. Not in the way they go in, internally.

3. I wouldnt undertake this sort of project unless I could do most work myself. (welding, etc) Why? because its simply not economical to pay someone to do the work. That and its not rocket science.

Edited by Flipmo
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Given a LS1 weights about the same, has more torque and will easily make good power...

Why not just go down that route especially considering you are paying a workshop.

If it was a DIY on weekends then fair enough, but paying workshop rates you should go the cheaper labour option...

FrangaR33 Mentor

FrangaR33

Posted
Posted

School holidays thread?? hmmm :)

Anyways if your chasing power and your currently driving the V6 do a V8 conversion, you can buy entire donor cars for as little as $1500 a couple of weekends later you have yourself a V8 commodore and you might even be able to break even if you part out the donor car on ebay. Getting that approved is a piece of piss compared with engineering a LS1 or a RB26. And if you really want massive amounts of power for an extra 5-7.5k you can get an ADR approved supercharger kit and be cranking out 230kw+ at the wheels. All legal no worries for less than 10k if you do the work yourself. Compared with an RB26 conversion its a bargain.

mad082 Grand Master

mad082

Posted
Posted
mate, if you go through with the conversion, let it be for only one reason:

to piss off all the one eyed skyline nut swingers :)

*pleasedontbanmekthnxbye*

+1

i've seen a 33 front bar on a commodore. brought a smile to my face. also the ease of fitting meant that a hsv front bar could be fitted to a 33. makes me wish i still had my 33 so i could put a commodore front bar on it to piss off all the people who think that skylines are the best car ever made, LOL.

Birds Grand Master

Birds

Posted
Posted

lol @ all the Commodore hate on here. Sometimes you lot are worse than the bogans who scream out riceboy everytime they see an import...

Anyway, these projects are usually undertaken by A.) people with too much money and not enough possessions, B.) people who know how to do most of the work themselves, or C.) idiots. If you're not one of these then don't do it...

Bolt on supercharger/turbocharger kit for the win, LS conversion for the win, smaller displacement high revving engine for the loss (of money).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...