Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Nah no realy benefit, remote turbo set-ups are usually done due to spacing constraints.

Ends up being pretty laggy, but makes similar powar. Also they dont usually need intercoolers cos the piping is soo long, the air looses all its heat on the way back to the motor.

That is a f**king sick car. Sounds porn, looks amazing.

:drool:

Nah no realy benefit, remote turbo set-ups are usually done due to spacing constraints.

Ends up being pretty laggy, but makes similar powar. Also they dont usually need intercoolers cos the piping is soo long, the air looses all its heat on the way back to the motor.

That is a f**king sick car. Sounds porn, looks amazing.

:drool:

Exactly what I was thinking.

The turbo housing should also act as an intercooler as the outside air is blowing onto it.

Instant cooling...

+ this setup seems quite popular in the USA.

Im still not a believer of such setups.

One dude in FI has something similar ATM ("STS" thread)... But with ALL that extra pipe work, there MUST be some delay & lag on that set-up over conventional stuff.

Also add in the extra weight, weight balance all that pipe would come into etc etc.

I think the fact they all usually do it with resonable cube V8's kinda negates it a bit - but you can hear from the video how long the turbos take to get on song

Hence, i ain't convinced.

Very sexy car though.

Im still not a believer of such setups.

One dude in FI has something similar ATM ("STS" thread)... But with ALL that extra pipe work, there MUST be some delay & lag on that set-up over conventional stuff.

Also add in the extra weight, weight balance all that pipe would come into etc etc.

I think the fact they all usually do it with resonable cube V8's kinda negates it a bit - but you can hear from the video how long the turbos take to get on song

Hence, i ain't convinced.

Very sexy car though.

Yeah not exactly responsive, especially for such small turbos.

doesn't matter on that setup though as he's got high comp Lexus V8 power... the turbos would just give more torque/power and fatten out the midrange and top end... he's only running 5psi if I heard correctly

sweet car... pity about the gearbox, sounds slushy changing gears... a manual would be so nice

doesn't matter on that setup though as he's got high comp Lexus V8 power... the turbos would just give more torque/power and fatten out the midrange and top end... he's only running 5psi if I heard correctly

sweet car... pity about the gearbox, sounds slushy changing gears... a manual would be so nice

Yeah i agree with that, still would be much better with a "real" turbo setup though, If it were mine I would just leave it Aspirated.

V160 Conversion wouldn't be too hard they are just a Fat version of an IS250 and bell housings are avaliable to suit the UZ motor

the adgantage is that you don't have to go making up new manifolds, trying to squeeze turbos into tight engine bays with v8 motors, and on NA motors lag won't be that much of an issue. because you don't really need to run much in the way of intercoolers and the turbos aren't massive. you will have some lag though obviously.

an advantage though, epic turbo spool noise coming out the exhaust as it doesn't have to pass through any mufflers after the turbo.

the adgantage is that you don't have to go making up new manifolds, trying to squeeze turbos into tight engine bays with v8 motors, and on NA motors lag won't be that much of an issue. because you don't really need to run much in the way of intercoolers and the turbos aren't massive. you will have some lag though obviously.

an advantage though, epic turbo spool noise coming out the exhaust as it doesn't have to pass through any mufflers after the turbo.

I have been thinking about doing this to my 5ltr NC fairlane for those exact reasons.

H O M O

he def needs more shit carbon everywhere

and shoulda just bought one of these

http://www.turbowhistler.net/

sounds the same

having the turbo in the back seat is plausable . http://speedhunters.com/archive/2010/07/20...k-pink-s14.aspx

80% of the energy the turbo uses comes from exhaust heat

how hot is your manifold ? vs how hot is the exhaust gas at the tip ? you do the math

Edited by lachlanw

how does the turbo use heat? the turbo uses exhaust gas flow. sure the exhaust gas has less density when it is hotter, therefore being a larger volume, but if you take this into account with exhaust size and turbo size you could balance things out a bit. plus there is the advantge of the fact that a byproduct of the turbo is heat, which then reduces power, so having it further away reduces the power loss through hotter intake temps and restrictive intercoolers.

not goin to argue how a turbo works . go read a book instead of the internet

on another note of someone came to me and had lots of money and wanted this id be happy to do it and he is obvoiusly happy with it

there was a huge debate on this on NS a while back. short answer, no.

-increased intercooler piping thus more lag.

-increased risk of turbo damage.

-decreased life span of the turbo. whenever it rains the turbo will be sprayed with water. since the inside of the exhaust hosing will be around 900c yet the outside is being sprayed with cool water, the great temperature difference is likely to cause cracking.

-cheaper, easier and more common to do with the correct way.

Edited by Peter89

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...