Jump to content
SAU Community

Recommended Posts

I personally think that I would prefer an EFR8374 on my car. In saying that you couldn't really ask much more from the PTE 6262, 710rwhp is crazy and response is very good.

The main thing that turned me off the EFR was the physical size and lack of housing options in external gate, in fact if someone can show me one will fit between my strut tower and my motor, plus a T4 divided in a 0.8 rear and I'll give it a go

I have my 8374 fitting between the struts in my R32, and it has the T4 divided .92A/R IWG housing so it's even fussier to fit. Yeah it's tight, but no issues. You wouldn't want anything smaller than the .92a/r on an RB26 or RB30.....it's borderline too small on mine, I could still fit the A/C pump back in if I wanted......but I'm reserving the space for a dry sump pump one day :-) Edited by Sub Boy32

I have my 8374 fitting between the struts in my R32, and it has the T4 divided .92A/R IWG housing so it's even fussier to fit. Yeah it's tight, but no issues. You wouldn't want anything smaller than the .92a/r on an RB26 or RB30.....it's borderline too small on mine, I could still fit the A/C pump back in if I wanted......but I'm reserving the space for a dry sump pump one day :-)

You arent using a full race manifold then I guess? My full race manifold put the turbo quite a fair bit forward

You arent using a full race manifold then I guess? My full race manifold put the turbo quite a fair bit forward

No, I had Sinco Customs make me one, it's similar to their TO4Z manifold, but has been lowered to suit the extra height of the RB30 and the size of the EFR.

TurboFit1.jpg

TurboFit2.jpg

With the EFR7064....in T4 TS 1.05 A/R configuration

Would this be enough for insane response, broad power band and 8000rpm redline on a 2.0L or 2.2L SR20 (with correct cam selection) while pushing over 400rwhp?

My goals are to find a turbo which will support my goals of a very fast street car (in all aspects) which will also be brutal on the circuit...

With the EFR7064....in T4 TS 1.05 A/R configuration

Would this be enough for insane response, broad power band and 8000rpm redline on a 2.0L or 2.2L SR20 (with correct cam selection) while pushing over 400rwhp?

My goals are to find a turbo which will support my goals of a very fast street car (in all aspects) which will also be brutal on the circuit...

The newer 7163 should be superior, both will support more than 400whp on E85.

Want to keep it on 98 octane....

I like the idea of dual external wastegate T4 twin scroll.... which the 7163 doesn't have.

The 7064 seems (t4 ts 1.05/ar ext wastegate) seems as though itll have more top end potential whilst retaining savage response...

With the EFR7064....in T4 TS 1.05 A/R configuration

Would this be enough for insane response, broad power band and 8000rpm redline on a 2.0L or 2.2L SR20 (with correct cam selection) while pushing over 400rwhp?

My goals are to find a turbo which will support my goals of a very fast street car (in all aspects) which will also be brutal on the circuit...

The 1.05 is prob a bit big. The .92 easily,easily will achieve that goal. I have a 2.15L SR20 with a 7064 .92 and Poncams (tiny) and mine made 258rwkw on about 16psi with very,very conservative timing. It goes a lot harder now but haven't dynoed it since. Still can't afford to take it in for another run. With 24-26psi and 260 degree Procams, it'd go off it's head (Prob 350 odd rwkw. My injectors/gearbox/clutch would not support that level of power).

Edited by bradsm87

Awesome to hear Brad....

What RPM are you achieving full boost and what is the transient/throttle response like? Is the acceleration fairly savage as is and what is the car like for spirited driving?

I hear the EFR's well and truly come to life when high boost is pushed into them.

Full boost at 3300 if loaded up in a high gear from low RPM. Transient throttle at anything above 3700 is insanely, insanely quick on to boost. Comes on gradually and very controllable if loading up from low rpm. If u hit the throttle at 4500-ish, u gotta be careful becomes on very fast and hard.

Been wondering if it's physically possible to fit a 7163 onto a RB25 stock manifold.

I make out that a GT3071 is about 150mm from face of flange to furthest point on compressor housing. The 6758 (which I understand is outline identical to 7163) is about 165~170mm in T25 form. Possibly even bigger in TS T4 format. Given you would need a spacer to fit the 7163 (to convert to T3), it's probably 20mm or so closer to shock tower...

Anyone know how much extra room there is in R33 GTST engine bay with GT3071 / GT3076? Would one of these EFR turbos fit?

Pics below of references. I made pretty agricultural measurements assuming the pics are to scale.

post-83859-0-29311700-1387582398_thumb.jpg

post-83859-0-99090700-1387582523_thumb.jpg

Also for s#!ts and giggles, I overlaid GT3071, GT3076 and EFR 7163 compressor maps.

Notes:

Efficiency island:

GT 76%

EFR 74%

Speed lines:

GT 120k

EFR 110k & 130k

The 7163 looks pretty damn impressive. Thoughts on how spool time would be compared with GT3071?

post-83859-0-92399000-1387583072_thumb.png

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...