Jump to content
SAU Community

Recommended Posts

John, what are you you running in your gtr anyway? You inspired me to go twin efr a few years ago but I never really know your whole story

Slightly off topic but some pics from last night's clean. Excuse the shit pics, crap phone and a couple of beers too many!

post-53650-0-36734600-1417387104_thumb.jpgpost-53650-0-34158500-1417387105_thumb.jpgpost-53650-0-08653600-1417387106_thumb.jpgpost-53650-0-58456600-1417387106_thumb.jpg

post-53650-0-92864100-1417387107_thumb.jpgpost-53650-0-65566400-1417387108_thumb.jpgpost-53650-0-51171200-1417387109_thumb.jpgpost-53650-0-24306800-1417387110_thumb.jpg

  • Like 3

Very nice, that wing is massive, what is it and where did you get it if you don't mind me asking :)

It's a custom job by Andrew at Custom Carbon Creations or CCC. Designed by Scott Beaton from Aero Design, the guy behind the WTAC rules.

I've recently cut it down 100mm each side also, was huge back then!

Did you get the proshonk stuff sorted?

Love the green wheels

Not yet, car is resting until next year now. I've ordered some replacement LCA's and just need to make new hats and dogbones to better space the rotor.

Thanks, matches the green roll cage also (can't really see that in the pics)

No twin scroll? :(

Im thinking about going to a 7163 and getting rid of my oil leaking FP green on my evo as FR have a lowmount kit out/coming out. I believe Geoff has 1 on his evo now.. Id love to hear how thats going and what fitment is like from Geoff. I wouldn't wanna sacrifice any response over the green even though i know its a 6lb bigger turbo..

Do it! The EFR7163 will blow the FP green out of the water....

All though it is a lot of money for not much more top end (if any)... Might be better to look at a twin scroll EFR7670??

Edited by Tonba
  • Like 1

Haha im pretty confident that the EFR will smoke the HTA. But i dont wanna sacrifice ANY response. Im not after top end at all Alex its the midrange & response i seek :) id also like to stay lowmount.

  • Like 1

To be honest id be happy with 330-350kw max but i just want the most responsive setup with most area under the curve i can. The green starts moving in lower gears at around 3700 that'd be as laggy as id like.. As you know Point to point there isn't much faster than an evo.. I want to keep to that recipe as much as possible with my car as it suits the style of driving i enjoy most. :)

To be honest id be happy with 330-350kw max but i just want the most responsive setup with most area under the curve i can. The green starts moving in lower gears at around 3700 that'd be as laggy as id like.. As you know Point to point there isn't much faster than an evo.. I want to keep to that recipe as much as possible with my car as it suits the style of driving i enjoy most. :)

How about you grab a 7163 or a 7064 and tell me if it's nicer than your GTX3071 :P Then maybe i'll chuck one on my 34...

I've seen a couple of tests where the 6258 doesn't really outspool the 6758 despite the smaller wheel and falling off much sooner. IIRC one comparison was on the ART silvia and the other was a Perrin test.

Given how fast the 6758 spools it doesnt matter too much, but still, anyone know what the deal is?

Edited by Skepticism

I don't know for sure what the story is there, I have seen ones where the 6258 comes on quicker but either way I do know and have before seen dyno plots which don't represent what happens in the real world - at least in terms of response. Might investigate but either way I see no reason in going smaller than a 6758 as a single turbo on something aftermarket

Is anyone running an EFR8374 with 0.92 A/R T4 twin scroll (internal wastegate) on an RB25/26?

What sort of power could be made with this turbo, WMI setup and other required supporting mods? I have not been able to find much info about actual results with this turbo.

Cheers

Justin

Is anyone running an EFR8374 with 0.92 A/R T4 twin scroll (internal wastegate) on an RB25/26?

What sort of power could be made with this turbo, WMI setup and other required supporting mods? I have not been able to find much info about actual results with this turbo.

Cheers

Justin

I'm running one on an RB30/26 ?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...