Jump to content
SAU Community

Recommended Posts

Those exhaust versus intake manifold pressure levels are pretty unacceptable imho. You'll find at that kind of level your engine VE will be plummeting compared to normal, if it's even sustainable My take away from that is the 7670 is a terrible call for that engine setup - at least at those rpm.

Nismo32ish - because the way the thread convo has panned out I feel compelled to point out that these theoretical numbers AREN'T for E70 like the earlier discussion could lead one to think.

Would the 8374 had been a better choice for my 3.2 build for response , I was looking at the 8374 when I was sourcing parts but was recommended to get the 6262, that turned out to be a 6266. Just wondering, Paul is being a pest,lol

Would the 8374 had been a better choice for my 3.2 build for response , I was looking at the 8374 when I was sourcing parts but was recommended to get the 6262, that turned out to be a 6266. Just wondering, Paul is being a pest,lol

I'd have gone an EFR8374 over a Precision 6266 on your car with what you were after, money being no object. I'm certain it'd be a nicer setup - though I'm not really so sure it'd be worth the money and effort changing now that you have the 6266 - though. Depends on if you still feel it needs more snap? Maybe try and find someone with an EFR on board?

Edited by Lithium

I'd have gone an EFR8374 over a Precision 6266 on your car with what you were after, money being no object. I'm certain it'd be a nicer setup - though I'm not really so sure it'd be worth the money and effort changing now that you have the 6266 - though. Depends on if you still feel it needs more snap? Maybe try and find someone with an EFR on board?

See what I mean about a pest :)

When I said OK to the 6262 it was going on the 2.6 as luck had it they put the 6266 on ?? so I thought I would leave it on and see how it goes with the 3.2 and it is pretty good but the 8374 seems to get going a bit earlier and I would like a bit more snap but happy with the way it goes.

If I ever decided to change the 6266 to a 8374, is there much extra work to fit it on the setup I have now?

Dump pipe won't line up and a slight pipe mod to the pipe that runs from the turbo outlet to the guard.

This is your fault, making me think about another stupid Turbo that probably not worth the exchange for the extra go ?

Hard to find out much about the 2 but there does not seem to be much in it, the 8374 seems to spool a little earlier, but very little from what I could see, but ??

The PT6266 CEA is Gen 2

Edited by Nismo 3.2ish

This is your fault, making me think about another stupid Turbo that probably not worth the exchange for the extra go ?

Hard to find out much about the 2 but there does not seem to be much in it, the 8374 seems to spool a little earlier, but very little from what I could see, but ??

The PT6266 CEA is Gen 2

For what it's worth Pete, just leave it alone and drive it. Honestly.

  • Like 1

For what it's worth Pete, just leave it alone and drive it. Honestly.

This is exactly right. That 6266 makes serious top end (I would think compares better to the air works 8376 s300sxe I posted). Only problem is there isn't s lick of data on precision turbos and I'm a mechanical engineer. I like designing before I commit my money!

Those exhaust versus intake manifold pressure levels are pretty unacceptable imho. You'll find at that kind of level your engine VE will be plummeting compared to normal, if it's even sustainable My take away from that is the 7670 is a terrible call for that engine setup - at least at those rpm.

Nismo32ish - because the way the thread convo has panned out I feel compelled to point out that these theoretical numbers AREN'T for E70 like the earlier discussion could lead one to think.

Totally true!

Didn't want to make TOO many changes. This would be closer to racegas.

FYI I've started working on timing. WOW...BIG changes!

Be prepared for new dyno numbers! Haltech is super conservative! This car just picked up a definite seat of the pants increase at only 2 deg advance...and NO KNOCK.

EDIT - just reviewed log and Fuel pressure is dropping off on top end. I'm betting I've maxed the DW300 pump. It hung in there pretty well...any clue on what -6 AN lines and stock fuel lines will do? Am I limited there as well while I'm making changes?

  • Like 1

I have the Haltech 2500 Elite ECU, having some spiking problems. Went back and had a tune touch up and seemed to fix it but the weather went cold and I am having the same problem @ 4000rpm + after it is on full boost. It spikes and the ECU makes it drop back for a split second and off it goes again. Just needs a touch up again to sort it out , but I was wondering, the HKS evc 6 boost controller was taken off and then the ECU was running the show,

Would the same spiking situation be happening if the HKS boost controller was controlling the boost, I am not changing anything, just wondering ?

I have the Haltech 2500 Elite ECU, having some spiking problems. Went back and had a tune touch up and seemed to fix it but the weather went cold and I am having the same problem @ 4000rpm + after it is on full boost. It spikes and the ECU makes it drop back for a split second and off it goes again. Just needs a touch up again to sort it out , but I was wondering, the HKS evc 6 boost controller was taken off and then the ECU was running the show,

Would the same spiking situation be happening if the HKS boost controller was controlling the boost, I am not changing anything, just wondering ?

ECU should do a better job than the evc. Extreme temperature swings will challenge any system at full boost. Mention it next time you are in the shop but I wouldn't think it justifies a special trip.

ECU should do a better job than the evc. Extreme temperature swings will challenge any system at full boost. Mention it next time you are in the shop but I wouldn't think it justifies a special trip.

This was explained and I do understand.

Just wondering, the adjustments had been made to the tune on a cold day and it was great for a couple of weeks, then the weather started turning cold up here when it started happening again. I usually go early in the morning, at the coldest time of the day, so I waited until 2pm when it was much warmer and ran it again, same thing happens.

This only happens on E85 and it makes 75KW more than 98 pump @ around 4000rpm , could this cause the spike as it wants to keep boosting and the ECU steps in and stops it and brings it back to where the boost should be..

I am not worried, I am with a great shop that looks after their customers, just good to get feedback from blokes that know what they are talking about and you may find it interesting or have had the same experience :/

lower the base duty and let the closed loop do the rest

He is trying to hold the wastegate shut as long as he can to build the boost faster, looks like it has to be less aggressive for the colder weather , boohoo .

Add a trim knob. Not sure how it works on those models but in closed loop on platinum the trim knob can lower the target boost (and resultant tables). In open loop it drops duty cycle by a certain percent.

I am not worried, I am with a great shop that looks after their customers, just good to get feedback from blokes that know what they are talking about and you may find it interesting or have had the same experience :/

How much spike

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...