Jump to content
SAU Community

Recommended Posts

I'm also on the internal map sensor so that's why I don't like to run more than 20 at the moment I don't mind a little 2 pound spike over but I'll only hold it at 20psi at this stage.
every load cell has been tuned except for the impossible areas which never get seen in reality.
but while you have those recorded logs on the haltech it's a good time to go and address those load cells at 1000 RPM and up while you have the logs available I'll ask you are you running closed loop o2 control.?
for myself Im only using it for vacuum areas as soon as mine sees 0 PSI I switch to open loop and run off the map directly.
How you have yours configured makes a big difference on whether you can make those fine adjustments based off logs that's all

[emoji111]




  • Like 1
2 minutes ago, mr skidz said:

I'm also on the internal map sensor so that's why I don't like to run more than 20 at the moment I don't mind a little to pound spike over but I'll only hold it at 20psi at this stage. I'm at my car pretty anally so every load cell has been hit except for the impossible areas which never get seen in reality but while you have those recorded logs on the hell tech it's a good time to go in a dress those load cells at 1000 RPM while you have the logs available I'll ask you are you running closed loop au to control for myself I'm only using it or vacuum areas and like cruise soon as my a 0 PSI is detected I switch to open loop and run off the map directly.
How are you have yours configured makes a big difference on whether you can make those fine adjustments based off logs that's all

switching sounds like a good idea. I actually had pretty good results from open loop at first, but now I'm running full closed loop. It is a little frustrating in that you can get it perfect for fast shifting then it's weak on the low ramp or vice versa. The alternator voltage seems to have helped my fuel pump keep up with power (an issue I've been having), so I was afraid to try much leaning or boost until I get that sorted.You can see my request and actual outputs in that log (I think I have everything checked).

Keen (as you guys say) to see your results.

11 minutes ago, acsplit said:

Meanwhile I am very happy with my -5 3ltr setup and would not change it.

 

Now I am unsubscribing from this thread because of too many useless posts! :D

It sounds like it would be a great combo. Enjoy it. This thread is far too old and far too diluted to complain about, but I am trying to still provide what data I can to help those make an educated decision.

  • Like 2
56 minutes ago, mr skidz said:


That would be a torque monster!

Yep it is, pulls stumps good!

Ask Paul or Steve-o and that was before it made 370 rwkw @17psi on 98.

*I have now changed notifications to a weekly digest :) back to the EFR talk.

 

unnamed.jpg

  • Like 3
Where have people sourced the correct Vband and clamp for the 8374/9180 compressor housings?

 

Treadstoneperformance (TRE) you can weld 3" on the inside of theirs and 3.5" on the outside.

3" assembly:

http://www.treadstoneperformance.com/product.phtml?p=68259&cat_key=613&prodname=Borg+Warner+EFR+Turbine+Housing+V+Band+Clamp

Both 3 and 3.5" flange:

http://www.treadstoneperformance.com/product.phtml?p=2542&prodname=Borg+Warner+EFR+Turbine+Housing+V+Band+Flange+3.5%22+Downpipe

I would not waste my time going 3" again

Nicks car just in.

-5's 424 rwkw at 24 psi 

8374 1.05 462 awkw at 24 psi.

Same setup, same engine. 3.0, 9.0:1 comp, 260 poncams. No graph yet.


We don't care about peak power, how does it drive?
  • Like 1
11 minutes ago, acsplit said:

Yeah that is not my RB30.

SR20DET built motor stock head.

EFR 7163. There is a lot of history in this car, I will update more when the owner gives it the nod. Should be tuned next week

Yes please. I have the TS 7163 IWG on SR20. Interested in others results.

Cheers

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
×
×
  • Create New...