Jump to content
SAU Community

Recommended Posts

Get some neg camber on that sucker - STAT!! 4mm different offset than mine (+22) and your's is full mexican!

I fitted my bluetooth adaptor for the headunit, so now I can take and make calls without worry of getting busted on the phone.

i will hit the coilover soon enough if i put too much in... its got like 1.5 degrees now so NOTHING... just lipped the gaurds more and not touching at all anymore :)

they were +30 with a 5mm spacer.

So that confirms the ideal M35 fitment as 9.5 +35 offset.

Oh and they look insane! so tough!

come again?

if they were +30 and he added a 5mm spacer, that would mean that they are now sitting effectively at +25

or if they are +35 with a 5mm spacer then they would be effective +30

etc

finally got around to aligning mine, and very happy - exactly what i wanted (well maybe closer to 3 deg neg on front but 2 is fine) :P

18x9.5+2

18x9.5+1

front -2 deg camber

rears -.5 deg camber

100_1405plateless.jpg

100_1413plateless.jpg

100_1409plateless.jpg

how the driveway go mike?

yeah not too bad, no dramas getting out and only a little bit of rubbing from the front bar getting in surprisingly.

the wheel aligners was another story.. had to have a couple of blokes push me up their driveway cos i got beached sea-sawing :ph34r:

I accidentally bought some wheels when I went to get a fresh set of tyres... 19x9.5 +35 with 5mm spacer on all 4 fit peeeeerfect.

stagea.jpg

I will get some better photos soon.

NICE!!!

might have to do my headlights soon!.....once I stop buying other parts!!!

I accidentally bought some wheels when I went to get a fresh set of tyres... 19x9.5 +35 with 5mm spacer on all 4 fit peeeeerfect.

stagea.jpg

I will get some better photos soon.

LOL @ "accidentally" bought new wheels...

LOL @ "accidentally" bought new wheels...

lol I just accidently bought a 15g R33 GTR

going to sydney soon to pickup

must sell the track car now

currently fitting wilwood brakes, to put the brakes back on the r32.

might end up selling the stagea if I enjoy the gtr too much. or vice versa

Well it seems I need a different loom and a relay of some sort. :D

do you mean you're putting in the little motor that helps close that last little bit or the one where you push the button and the whole tale gate opens and closes?

if its the latter, where did you get it from and how much? i like gadgets :P

Well it seems I need a different loom and a relay of some sort. :wub:

If you can get a part number (and a picture) for the relay i have a box full of relays and resistors and other odd little electrical boxes left over from my wrecked car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...