Jump to content
SAU Community

Recommended Posts

Get some neg camber on that sucker - STAT!! 4mm different offset than mine (+22) and your's is full mexican!

I fitted my bluetooth adaptor for the headunit, so now I can take and make calls without worry of getting busted on the phone.

i will hit the coilover soon enough if i put too much in... its got like 1.5 degrees now so NOTHING... just lipped the gaurds more and not touching at all anymore :)

they were +30 with a 5mm spacer.

So that confirms the ideal M35 fitment as 9.5 +35 offset.

Oh and they look insane! so tough!

come again?

if they were +30 and he added a 5mm spacer, that would mean that they are now sitting effectively at +25

or if they are +35 with a 5mm spacer then they would be effective +30

etc

finally got around to aligning mine, and very happy - exactly what i wanted (well maybe closer to 3 deg neg on front but 2 is fine) :P

18x9.5+2

18x9.5+1

front -2 deg camber

rears -.5 deg camber

100_1405plateless.jpg

100_1413plateless.jpg

100_1409plateless.jpg

how the driveway go mike?

yeah not too bad, no dramas getting out and only a little bit of rubbing from the front bar getting in surprisingly.

the wheel aligners was another story.. had to have a couple of blokes push me up their driveway cos i got beached sea-sawing :ph34r:

I accidentally bought some wheels when I went to get a fresh set of tyres... 19x9.5 +35 with 5mm spacer on all 4 fit peeeeerfect.

stagea.jpg

I will get some better photos soon.

NICE!!!

might have to do my headlights soon!.....once I stop buying other parts!!!

I accidentally bought some wheels when I went to get a fresh set of tyres... 19x9.5 +35 with 5mm spacer on all 4 fit peeeeerfect.

stagea.jpg

I will get some better photos soon.

LOL @ "accidentally" bought new wheels...

LOL @ "accidentally" bought new wheels...

lol I just accidently bought a 15g R33 GTR

going to sydney soon to pickup

must sell the track car now

currently fitting wilwood brakes, to put the brakes back on the r32.

might end up selling the stagea if I enjoy the gtr too much. or vice versa

Well it seems I need a different loom and a relay of some sort. :D

do you mean you're putting in the little motor that helps close that last little bit or the one where you push the button and the whole tale gate opens and closes?

if its the latter, where did you get it from and how much? i like gadgets :P

Well it seems I need a different loom and a relay of some sort. :wub:

If you can get a part number (and a picture) for the relay i have a box full of relays and resistors and other odd little electrical boxes left over from my wrecked car!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...