Jump to content
SAU Community

Recommended Posts

It was literally a 20 minute job :( It's been driving me bezerk!

I'm happy to not have you not pay me to not do it? Not? :D

If you want some tape I can probably hook you up. Either that or Con-Tact adhesive backed felt is good for this too.

only kidding mate. my car doesnt have many rattles.

if i hear anything i shouldnt, i just turn up the radio :D

hopefully got a buyer for my corolla so i dont have to sell my other cars due to the gfc!- quite happy as id sell my first born before i sold the stagea :D

anyone recommend a brissy local for a starter rebuild?

Edited by PetroDola
hopefully got a buyer for my corolla so i dont have to sell my other cars due to the gfc!- quite happy as id sell my first born before i sold the stagea :D

anyone recommend a brissy local for a starter rebuild?

From what im told they cant be repaired as it is one of the copper coils that blows out (thats what happened to mine anyway) you will probably need to source a s/h one from a wreckers. I know they are the same as a VQ25, possibly VQ30. 3.5 has a different part number but may fit...

I have one here in need of repair if they happen to find the parts to fix yours...

3/4 of the way through fitting up my new motor with all my other bit's....hopefully tomorrow the motor and gearbox back in!

Nice intake mate... :D

You managed to keep the heat shield too. I bet its easier to work on the turbo out of the car...

From what im told they cant be repaired as it is one of the copper coils that blows out (thats what happened to mine anyway) you will probably need to source a s/h one from a wreckers. I know they are the same as a VQ25, possibly VQ30. 3.5 has a different part number but may fit...

I have one here in need of repair if they happen to find the parts to fix yours...

sobering - i thought it mightve been an oil lubricated one and thats why it cooked.

sourcing one from wreckers isnt going to be easy around these parts , maybe down there, looks like my car is going to be bricking the driveway for weeks to come if thats the case.

what else other than an m35 has a vq25 though ?

thanks for the solid advice Scott

Edited by PetroDola
From what im told they cant be repaired as it is one of the copper coils that blows out (thats what happened to mine anyway) you will probably need to source a s/h one from a wreckers. I know they are the same as a VQ25, possibly VQ30. 3.5 has a different part number but may fit...

I have one here in need of repair if they happen to find the parts to fix yours...

What bit can't be repaired? You have rewinders surely?
howd u do the diff ?

I got a bit carried away in the grass events at the local car show. I think I dumped the clutch too hard in reverse gear... :P

Gunna get it fixed in the new year. New diff, uni joint for the drive shafts, get the rear diff checked out, brass button clutch is a little noisy so that will get a look too.

I am keen to have an A1 drivetrain. Does anyone know if these cars will handle 8000RPM launches? :P

sobering - i thought it mightve been an oil lubricated one and thats why it cooked.

sourcing one from wreckers isnt going to be easy around these parts , maybe down there, looks like my car is going to be bricking the driveway for weeks to come if thats the case.

what else other than an m35 has a vq25 though ?

The J32 Maxima (2009) has a VQ25de I believe. Wouldn't think the starter would be any different to what we have.

Edited by iamhe77

I cleaned my Stagea last night! Filled it up with fuel. (full tank - $100 later FFS!)

Going to clean the interior and do a bit of a service soon!

She goes alright. Not as quick as a Turbo Datsun 1600 though :P But a hell of a lot quieter. :P

I cleaned my Stagea last night! Filled it up with fuel. (full tank - $100 later FFS!)

Going to clean the interior and do a bit of a service soon!

She goes alright. Not as quick as a Turbo Datsun 1600 though :P But a hell of a lot quieter. ;)

Pics?

3/4 of the way through fitting up my new motor with all my other bit's....hopefully tomorrow the motor and gearbox back in!

nice man.

i'm still gonna call you Mr. Flinstone however!

intake looks nice. need to get Mr Fisher to make mine some time sooooooon.

The J32 Maxima (2009) has a VQ25de I believe. Wouldn't think the starter would be any different to what we have.

+1, VQ25dd, but as we know, its FWD... so may fit, maybe not?

Do they have a relay or something that could be kaput?

soo...

finally got the car back in my hands today!!

alot of you know that ive smashed up my engine rather bad... that aside all is well now :blink:

done and spent a dime on it, but is very very good now!!

made 217.10 AWKW/250kw rears on the 21st run @ 16psi.... (poor car!!)

turbo pulls amazing... as per dyno graph :P

post-47249-1291191938_thumb.jpg

Edited by chef_stagea

not bad at all what turbs you running and computer

soo...

finally got the car back in my hands today!!

alot of you know that ive smashed up my engine rather bad... that aside all is well now :)

done and spent a dime on it, but is very very good now!!

made 217.10 AWKW/250kw rears on the 21st run @ 16psi.... (poor car!!)

turbo pulls amazing... as per dyno graph :)

soo...

finally got the car back in my hands today!!

alot of you know that ive smashed up my engine rather bad... that aside all is well now :)

done and spent a dime on it, but is very very good now!!

made 217.10 AWKW/250kw rears on the 21st run @ 16psi.... (poor car!!)

turbo pulls amazing... as per dyno graph :)

Good result and yeah, what turbo? (You need to get that 260RS out from under your name - its confusing!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...