Jump to content
SAU Community

Recommended Posts

Congratulations to...

Aussie_Delivered_R32_GTR for its selection as the R32 GTR ADM representative at the GTR FESTIVAL in May.

Thanks Terry,

I'm really looking forward to this event.

Ironically the car hasn't been out since the 25th Anniversary in August 2014!

Fresh petrol won't hurt.

Bob.

That's great information - Thank You. I was a little suspicions as I also identified that the NSW registration history did not match their advertised story of the vehicle history. They may have an explanation for this though. But I am now better informed of the facts.

How did you know the exact month and colour? Is there a VIN code table that has a break down of the VIN layout and relevant codes so that they can be fully interpreted? I have tried to search to find it and haven't had much luck as there are too many references to VIN. :)

Thanks again

You need to find out more about how the car was imported; because nissan Oz was selling GTRs in 91/92 you can't import them yourself. About the only valid way for that car to be registered is if it was a Personal Import. Check the VIN with DOTARS to find out how it was complied.

I imported a 91 but it is only for race/rally use and can't be fully registered

Under the new rules you can't import them, but there are plenty of imports built around that time that are completely legal

link to proof? the rules have always been that low volume import is not possible when the manufacturer imports them. they can only come in:

Full homologation. Only nissan oz ever had this and only for 91/92 models.

1989 rule - was 15 year old until it was changed to stop all the post 1989 jap goodies coming in. Will become a 30 year old rule in 2019.

Personal import - if you can prove you owned it for 2 years (used to be 1) overseas

SEVS/RAWS etc if the manufacturer didn't import it at that time. So 89, 90, 93, 94 models are OK. 4 cars came in before 91 through scuderia veloce, the rest came in post 93.

Race/Rally - can't be registered except restricted/rally rego

Parts - has to be cut in half at a minimum.

Thanks Terry,

I'm really looking forward to this event.

Ironically the car hasn't been out since the 25th Anniversary in August 2014!

Fresh petrol won't hurt.

Bob.

Haha... And I think it'll be good to have "SAU" stickers on don't you (for MotiveDVD)?

link to proof? the rules have always been that low volume import is not possible when the manufacturer imports them. they can only come in:

Full homologation. Only nissan oz ever had this and only for 91/92 models.

1989 rule - was 15 year old until it was changed to stop all the post 1989 jap goodies coming in. Will become a 30 year old rule in 2019.

Personal import - if you can prove you owned it for 2 years (used to be 1) overseas

SEVS/RAWS etc if the manufacturer didn't import it at that time. So 89, 90, 93, 94 models are OK. 4 cars came in before 91 through scuderia veloce, the rest came in post 93.

Race/Rally - can't be registered except restricted/rally rego

Parts - has to be cut in half at a minimum.

we are talking about information that is now over 10 years old, but under the old system (green metal compliance plates) the rule stated the r32 skyline was eligible, which meant all variants and year models were eligible, just like the 300zx all turbo models were eligible

Under the new system that is not the case, you can only bring in year models that Australia did not sell new

Not exactly...........

The restricted R32's are only if manufactured between July 1 1991 and June 30 1992.

Consequently you could/can import them outside of these dates.

Cheers......... Bob.

post-78207-0-53449600-1454840897_thumb.jpg

Not exactly...........

The restricted R32's are only if manufactured between July 1 1991 and June 30 1992.

Consequently you could/can import them outside of these dates.

Cheers......... Bob.

under the new rule that is correct, under the old rule it was open slather
  • 2 weeks later...

I finally found someone willing to lend me an ADM rear number plate infill panel.

Im already looking at getting some reproduced.

Would anyone be interested?

  • Like 2

yuppp

Yes please

As soon as I firm up the prices and arrangements, ill let you guys know what is going on :)

The originals are made out of a thick rubbery kind of material, but the reproductions will be made from fiberglass, however carbon may be an option too.

  • Like 1

I just put up an "EOI" in the group buy section for these number plate panel infill copies:

http://www.sau.com.au/forums/topic/463043-eoi-adm-r32-gtr-rear-number-plate-infill-panel-copies/

  • Like 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...