Jump to content
SAU Community

Aussie Delivered R32 Gtr's

BoyWhoCriedWolf
 Share

Recommended Posts

Aussie_Delivered_R32_GTR Veteran

Aussie_Delivered_R32_GTR

Posted
Posted
2 hours ago, 21PC said:

Long time browser, first time poster. Been on the lookout for GTR's for the last few months and had contemplated bringing in a car from Japan with a decent looking V Spec I/High KMS Vspec 2 on the cards. Instead an opportunity came up and I just purchased an ADM R32 GTR in Silver. 

Not sure if I made the right decision regarding value/future value etc as they both were around the same cost but obviously not sure if the condition would have been the same etc. Although i'm sure the car from Japan would have come with some nasty surprises.

Congratulations Peter ....... If it is the one from South Australia I think you snatched a bargain.

It lasted less than 24 hours on Carsales/Carpoint.

I spoke to the owner and confirmed the build as number #51/100.......

I aslo advised him that the quoted colour splits were wrong. They are 45 Red, 30 Black and 25 Silver........ I know of at least 3 silver ones that have gone to god in the last 4 years, let alone what has happened to them in the 21 years prior. At the price you would have paid you can't lose.

What State/City are you in?

Cheers,

Bob.

  • Replies 1.7k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

petemac
petemac

Hi All, Better add myself to this list. Happy to be the new owner of the the ADM Bob has had for sale. Safely delivered here to Perth on Friday and have enjoyed in over the weekend. Bob did an exc

RBJETT
RBJETT

I  bought this car.... its pretty clean for a 25 year old car . ...

Aussie_Delivered_R32_GTR
Aussie_Delivered_R32_GTR

Not sure, but I was there -    Cheers...... Bob.  

Posted Images

21PC Enthusiast

21PC

Posted
Posted

Hey Bob,

Im in Sydney NSW.

I was actually going to ask about the front badge and how would you possibly source another one as it hasn't got the original Nissan badge but rather the S badge like on imports. Im hoping that they are of similar sizing to other Nissan cars but I think that it won't be. I also have to find some original seats that I will put back in at some time in the future as they were retrimmed in quality leather but i'm a sucker for originality.

Well that is reassuring, thank you for the insightful information! Didn't ever think id end up with an ADM especially given the precedent set this year at Shannons. 

I'll post some pictures when it arrives.

Regards,

Peter

Aussie_Delivered_R32_GTR Veteran

Aussie_Delivered_R32_GTR

Posted
Posted

Hi Peter,

The part number for the front badge is  6289262C00

Unfortunately the part has not been available for quite a while.

You can get a very similar badge off a period correct Pulsar/Exa or similar but it is slightly different.

That said it is closer than the "S" badge from the JDM's.

Send me a PM when it arrives and if you would like me to have a look at the car for you and help compile a list of "fixes" I'd be only too happy to help.

I have 2-3 main suppliers of used parts and 4-5 suppliers of new parts so usually between all of them we can go close to getting most things.

That said, some things are a hell of a lot harder to get than they were 18 months ago.

Anyway, drop me a line when she arrives.

Cheers,

Bob.

 

Marko R1 Grand Master

Marko R1

Posted
Posted
On 16/12/2016 at 5:14 PM, Aussie_Delivered_R32_GTR said:

Congratulations Peter ....... If it is the one from South Australia I think you snatched a bargain.

It lasted less than 24 hours on Carsales/Carpoint.

I spoke to the owner and confirmed the build as number #51/100.......

I aslo advised him that the quoted colour splits were wrong. They are 45 Red, 30 Black and 25 Silver........ I know of at least 3 silver ones that have gone to god in the last 4 years, let alone what has happened to them in the 21 years prior. At the price you would have paid you can't lose.

What State/City are you in?

Cheers,

Bob.

I saw that advert and also noticed the colour split was incorrect. Good job Bob :)

  • 1 month later...
MyBrosBaby Rookie

MyBrosBaby

Posted
Posted

Hi Everyone....Happy New  year to one and all.......looking for some help trying to find out if the recently

acquired 1992 R32 is an import or one of the 100 Aussie delivered cars............Thanks for your input.........Cheers Jon

Aussie_Delivered_R32_GTR Veteran

Aussie_Delivered_R32_GTR

Posted
Posted
4 hours ago, MyBrosBaby said:

Hi Everyone....Happy New  year to one and all.......looking for some help trying to find out if the recently

acquired 1992 R32 is an import or one of the 100 Aussie delivered cars............Thanks for your input.........Cheers Jon

All ADM 's were 1991 builds so most likely an import but please post up more info so we can confirm.

Bob.

  • Like 1
MyBrosBaby Rookie

MyBrosBaby

Posted
Posted

Hi...............thanks for that Bob.......just gotta find out the build date now............on the blue ID plate it says

0000/906 as the build number.............where do i find the  build date..............i could only find one plate that gives any details on the veihcle

does not show the date ....or am i reading it wrong..........thanx again for all the input..............Cheers Jon

MyBrosBaby Rookie

MyBrosBaby

Posted
Posted

Hi again....ok here are all the numbers of the blue ID plate in order from the top

IE-BNR32

BRN32-000O906

KBNR32RXFSLMZG

KH2   G

RB32DETT 2568

FS5R30APRC41

The "P" in the last line could be an "F".....can't read my own writing.......i'd go to the car but it's not where

i'm sending the email from............thanx again.............Cheers Jon

RS4StagMan Rising Star

RS4StagMan

Posted
Posted

Thanks does it have a silver build plate in the engine bay as well as the blue plate similar to the attached?

If so it is Australian delivered. 

Apologies to who's build plate I used as the example. 

image.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...