Jump to content
SAU Community

Recommended Posts

I got your PM - as i said earlier in the thread - everything else needs to be worked out first and i will advise everyone that has PM'd me about it when i have sufficient details ready.

Id say 1-2 months yet. Which is still 6 months out from the event.

Thanks.

  • 2 weeks later...

Chris - The post was removed until absolute confirmation is attained.

No further information will be provided until everything is signed/finalised/agreed upon.

As I've stated a few times, once we know and have everything confirmed, information will all be posted up and everyone contacted that needs to be regarding supporters/sponsors/media and other interests.

This will be a big event, there will be some massive headline/workshop cars coming along to support it.

Thanks

Ash

Ok there has been some talk in the locker rooms over the past week. Some of you might have been involved, some of you might have heard rumours, and some might just be in the dark…

Either way, it looks as if we have agreed in principle that it's about time we held an event to eclipse all those before it.

What better than SAU Nationals right? It's certainly long overdue, that much is certain ;)

The rough details are as follows:

Where: Victoria, around the Benalla/Wangaratta area, incorporating in Winton Raceway

When: Somewhere around June-July

Whats potentially going to happen?:

- Trackday

- Show'n'Shine

- Big BBQ sesh

There will be trophies/classes for events and all that jazz. There will also be a metric tonne of prizes, giveaways and so on.

It'll probably go over 2-3 days. Most people might need a day or two off work… I think it'll be well worth it however ;)

If you are a SAU Club member (QLD/VIC/NSW/SA/WA) then you will get priority entry into the events, also heavily discounted entry and accommodation pricing.

As always, it pays to be a club member.

More information coming in Feb 2011. Please feel free to give ideas/thoughts as we are only just starting to plan.

We will also be looking for businesses willing to sponsor the event. So if you are a business, want some naming rights or perhaps come along to promote/advertise – then please contact me (once the PM system is up and running)

Thanks

-Ash

President SAU-Vic

SAU Admin

As stated above, please use the PM feature to contact me. I'm not giving out my email address :)

Please be aware that at this point in time, I cannot provide options/details as we are still working out absolute costs.

If you PM me, i will PM you back - when i have the information available to me and proposals to distribute to people interested.

Thanks

Ash

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...