Jump to content
SAU Community

Recommended Posts

If somebody really wants to try this, the thing to do is email a request for a: TD06SL2-20g T3 10cm Internal wastegate with rear housing opened for use with 5 bolt or individual dump pipe, not single 3 bolt outlet and covered wastegate. wastegate to be uncovered.

What's wrong with a 3 bolt flange?

Sorry if something similar has been answered...

but im in the market for a turbo, want straight bolt onto rb25, and responsive 230-240rwkw

noticed they have a range of bolt on turbos for a 25, just not sure which one.

thanks in advance!

What's wrong with a 3 bolt flange?

theres nothing wrong with a "three bolt flange" in general, but these particular internal gate turbos that have a 3 bolt flange only have a little 2.25" outlet (from memory) and the rest of the flowpath is blocked off.

Understand what I mean now? Im simply identifying the cruddy IW housings as a 3 bolt

Sorry if something similar has been answered...

but im in the market for a turbo, want straight bolt onto rb25, and responsive 230-240rwkw

noticed they have a range of bolt on turbos for a 25, just not sure which one.

thanks in advance!

Did u post this on ns.com, If so I replied there

Sorry if something similar has been answered...

but im in the market for a turbo, want straight bolt onto rb25, and responsive 230-240rwkw

noticed they have a range of bolt on turbos for a 25, just not sure which one.

thanks in advance!

i think this is your answer - http://www.digi-hardware.com/rb25t3hiflow.html

$960 (inc stainless oil lines) + postage. you cant really beat that.

be good to see someone give one of these kd gt3582's a go

http://www.ebay.com....=item416003bba9

That looks epic, I would totally want one of those. GCG do a 3566R which is pretty much the same thing, they do it for XR6Ts. I rekon that would be a cool turbo, worth a shot. Price is phenomenal too.

Guys, Eiji has told me they only have surge slot front covers ATM in sl2-20g. Any difference with these compared to non surge slot? Would it affect anything if I run this cover??

Shouldnt be an issue. AFAIK Minor edge taken off the spool is the only ownside, might not buck as hard onto boost.

That looks epic, I would totally want one of those. GCG do a 3566R which is pretty much the same thing, they do it for XR6Ts. I rekon that would be a cool turbo, worth a shot. Price is phenomenal too.

Shouldnt be an issue. AFAIK Minor edge taken off the spool is the only ownside, might not buck as hard onto boost.

3540/66's have been built by everyone since the dawn of time, fastest vl has run 9.2 at 147mph in a full weight calais on 38psi with one , mid's 9's is typical

Would be awesome for a cheap 3.0+ turbo, or 2 on a 5.0-6.0 V8....

They take a fair edge of spool with that big comp wheel aswell, its a fair bit of a mismatch.

Be interesting to see how the twin entry housing went with a 6 boost

cheers

darren

Edited by jet_r31

Oh yeh forget to add a few weeks ago, Willal racing used to, and still does on there street gtr i think, run twin TD06 25G's on the os giken 3 litre motors, think they made'upwards of

650rwkw, the car went 8's at 160ish mph in the end, i remember the street car made 470rwkw on 20psi on bp ultimate 98 back in the day and ran

high 9's at 144mph in street trim, i think its on E85 now with a lot more power

street car

Edited by jet_r31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'll just leave this with, holy shit, those cars at work are awesome, and this will look wicked!
    • Could you modify this duct so instead it pushes the extra air through the radiator too and not down and out? For temps, I know it's not the greatest idea, but as a bit of a last resort, you could use a very intermittent misting spray onto the front of the coolers/rad. You don't want to be soaking them such that water is dripping off, but a small most on/off so that the water evaporates. That point of it constantly evaporating, rather than being soaked in water, will pull a LOT of heat out of the cooler. I'm literally thinking just the little mist sprayers for a garden from Bunnings. Being in a low humidity climate it will help even more! The other trick if you want to be ghetto is some shade cloth hung in the opening, and keep it wet. Pretty much now it's acting like an evap cooler on a house, but cooling the air you need to use to cool the radiator...   On a topic to think about too though, when air enters through the bumper, is it all nicely ducted from the edges of that opening back at a nice angle, or is it like most cars, and the edge of the opening just stops, and suddenly it's wayyy wider behind that? If it does the later, get it shrouded out at nice angles. When that opening changes too rapidly, it can actually cause a high pressure zone between the front bar and radiator, and limit air flow into that area, which means less air for cooling, as it effectively stalls the air, AND adds to drag...
    • Do you have any before and after photos? That's $200 just for the hydro blasting?
    • Yea pedal box and no abs
    • It doesn't look like there's a lot of options out there these days, and what's out there is performance oriented aftermarket stuff (with the GTR markup) I wonder if there are other cars with similar springs, after all its just a matter of length, diameter and stiffness. Alternatively, I did see coil spacers. Probably not the best option, but could be serviceable too.  
×
×
  • Create New...