Jump to content
SAU Community

Recommended Posts

yeh its works , depending on engines and if its doesn't surge like a mofo. Sometimes all it adds is lag, and it might just out power the smaller comp wheel right up the top of the power curve, whereas 90 percent of the curve is stronger with smaller comp wheel. That $200 hi-flow used to need a $800 boost controller to stop it breaking in half..lol

it was quick, but never stable!.And the surge..oh the surge, it surged under 4000-4500rpm like crazy... I know because i took Boostd in his first ever turbo car and got him hooked in 1998..lol, I have to spoken to Stao a little bit to , he's tried it the other way aswell, when he has been forced to use tighter turbine housing.

all interesting, but generally needs to be tested engine depend, the 3540/66 had been tested a fair bit, 6 boost was saying it doesn't make much more power on 4 litre ford motors as they run out of exhaust flow,

As a guide on a decent breathing single cam Rb30, you would have to run over 30psi, to have a hope of beating the 3540 comp wheel(vs 66 conversion) curve anywhere.

cheers

darren

thats the wheel sizes, physical housing sizes lol....

the t67 has a tiny little exhaust housing and a giant compressor housing. do the maths.........

Sorry I didn't realize that's not what you meant but yeah I get it now

yeh its works , depending on engines

but generally needs to be tested engine depend,

Totally agree, the weirdest and worst combinations in theory can often be used well in practice on the right motor.

hey guys somethings come up and I'm having to bail on my project...

so anyone wants my Kando sl2 with modded housing and Tial gate all brand new never used 1000$..

I will even throw in the 1O mm spacer and 3.5 inch fujitsibo exhaust if you want it..

you wont be dissapointed....unlike me :(

hey guys somethings come up and I'm having to bail on my project...

so anyone wants my Kando sl2 with modded housing and Tial gate all brand new never used 1000$..

I will even throw in the 1O mm spacer and 3.5 inch fujitsibo exhaust if you want it..

you wont be dissapointed....unlike me :(

Sorry to hear mate... Was looking foreward to seeing your results.

PM Sent

ARTZ, you make me sad.

i would've purchase your whole setup if only you put it up earlier. maybe convince handaldo to buy it all off you lol

hope it all goes well for you mate.

I actually looked u up straight away cause I wasn't sure if you bought one yet..sorry dude.. >_<

hey guys somethings come up and I'm having to bail on my project...

so anyone wants my Kando sl2 with modded housing and Tial gate all brand new never used 1000$..

I will even throw in the 1O mm spacer and 3.5 inch fujitsibo exhaust if you want it..

you wont be dissapointed....unlike me :(

Ah that sucks!

Although that is a really cheap deal for a bolt on tubo kit, actually it's a steal :thumbsup:

aahhhhhhhhh........ok f**k it.....

I'll finish what I started, on the cheap..then if I'm still sick of it, I will sell it...

sale on hold till further notice... :whistling:

one Q...will 550 nismos cut it...???

I know most are running the 740s but how much headroom is there??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...