Jump to content
SAU Community

Recommended Posts

They may be comparable on that day on that dyno

I guess thats what it comes down to - in this instance we can compare them, and Ryan made more torques than I did :pirate:

What mods do you have for 177.7awkw?

- GCG Highflow turbo

- Impul ECU

- Plenumn Spacer

- HDi FMIC

- Scottys 3" exhaust dump

- K&N Filter

No worries Paul about the F connectors.

Maybe Ryan had more torque on the day due to having a stock turbo that boosts quicker than a highflow.

Yeah could be, Dunc would need his tuned to make the most out of the high flow. Ryan still wouldn't actually have 566nm at the engine though. That is only 566nm of tractive effort.

Went for a quick spin to the St Peters bakery and the tv reception was great. When would you able to do the english language conversion for me?

Edited by slippylotion

Yeah could be, Dunc would need his tuned to make the most out of the high flow. Ryan still wouldn't actually have 566nm at the engine though. That is only 566nm of tractive effort.

Went for a quick spin to the St Peters bakery and the tv reception was great. When would you able to do the english language conversion for me?

you dont read do you. they are comparing their figures to eachother, no one gives a shit about whether its tractive effort, or engine torque. they are COMPARING the figures that the dyno spat out

you dont read do you. they are comparing their figures to eachother, no one gives a shit about whether its tractive effort, or engine torque. they are COMPARING the figures that the dyno spat out

Go back and read from the my first post on the subject sweet heart!

You clearly don't read as Ryan and myself made NO comment on comparing the 2 results. Im purely saying to Ryan that his torque reading is not correct!

F*ck me some people on here get excited very easily!!!

Edited by slippylotion

Look. The most important thing here is my car makes more torques than Duncs. Don't ruin this by making it an arguement on the accuracy of different dynos and the semantics involved.

As an aside for the c34 folk, big fella made a fair bit less power than us, and the guys on the dyno said it was hitting speed cut. Would this have been causing a lower figure to be reported?

Look. The most important thing here is my car makes more torques than Duncs. Don't ruin this by making it an arguement on the accuracy of different dynos and the semantics involved.

As an aside for the c34 folk, big fella made a fair bit less power than us, and the guys on the dyno said it was hitting speed cut. Would this have been causing a lower figure to be reported?

Possibly could of caused it to loose power from speed cut. But I would say its just becasue its a C34. Looks like you and Dunc will be able to beet him on the track. :thumbsup:

Meh, power figure was lower than I thought. But that just means all of the cars that can't beat it should be more embarrassed!

Not an issue tho, just a good baseline comparison for my tune, just gotta decide which option to take???

Possibly could of caused it to loose power from speed cut. But I would say its just becasue its a C34. Looks like you and Dunc will be able to beet him on the track. :thumbsup:

he he how egos will fall :whistling: . really can't wait for a la la day to be organised a true test of machine much better than the rollers and wasn't the highest stag there today a 34

Isnt nisstune the easy go to option for c34?

Good day at dyno day. Did I miss anything cool?

yeah nistune easy way for a 34 as long as its not series 1, but then other options give you ability to control tuning yourself :thumbsup: if your into that

he he how egos will fall :whistling: . really can't wait for a la la day to be organised a true test of machine much better than the rollers and wasn't the highest stag there today a 34

Just out of curiousity, what did the best Stag do?

whats the go with this unit HSK F-CON V pro GOLD ................. how do they compair to the stand alone NISMO ECU ?

Its an ecu that takes full control of the engine, other than the cams and throttle. The stock ecu remains to control them and the rest of the car. I just got mine installed tonight but there is a few niggles to work out before I would recommend one. The other hassle is finding a tuner, there are very few HKS dealers around the place and they charge through the nose...

The Nismo ecu is a plug and play remapped replacement computer that doesn't "need" a tune, but it would still need an Emanage to control it imo.

Its an ecu that takes full control of the engine, other than the cams and throttle. The stock ecu remains to control them and the rest of the car. I just got mine installed tonight but there is a few niggles to work out before I would recommend one. The other hassle is finding a tuner, there are very few HKS dealers around the place and they charge through the nose...

The Nismo ecu is a plug and play remapped replacement computer that doesn't "need" a tune, but it would still need an Emanage to control it imo.

sweet well let us know how you go!!!

I installed a set of dale's sway bars, adjustable links and big rear brackets yesterday. No real problems, just some difficult bolts and tight clearances around the exhaust for the rear bar. Got it on, but had to drop the exhaust.

All up about 3 hours work. Haven't been for a hard drive yet, but did about 40km yesterday and everything seemed good. I'll re-tighten everything this morning and go for a blast through the hills.

I installed a set of dale's sway bars, adjustable links and big rear brackets yesterday. No real problems, just some difficult bolts and tight clearances around the exhaust for the rear bar. Got it on, but had to drop the exhaust.

All up about 3 hours work. Haven't been for a hard drive yet, but did about 40km yesterday and everything seemed good. I'll re-tighten everything this morning and go for a blast through the hills.

Glad everything went well, have fun!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...