Jump to content
SAU Community

Recommended Posts

Aluminum would do the trick

I'm on board if Scotty is keen enough to knock a nice looking one up!!!!

I enquired about the ones on ebay

INFINITI G35 - RARE JDM POLISHED ALUMINUM LOWER ENGINE COVER UNDER PANEL TRAY

http://www.ebay.com/itm/271241580470?item=271241580470&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

For this one they want $420 for shipping through UPS and of course cannot guarantee fitment or at least a bit of chopping and changing would be required.

Infiniti G35 Aluminum Engine Splash Shield Under Tray Cover Black Powder Coated

http://www.ebay.com/itm/151074592895?item=151074592895&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

Also fitment cannot be guaranteed and would require chopping as G35 has a different width bumper to that of a Stagea

Can't remember who was asking for the stagea manual

but i put it up on dropbox

https://dl.dropboxusercontent.com/u/36164620/Stagea%20Service%20Manual.pdf

Let me know if it doesn't work! (give it a few hours as its still uploading tho)

I'm on board if Scotty is keen enough to knock a nice looking one up!!!!

I enquired about the ones on ebay

INFINITI G35 - RARE JDM POLISHED ALUMINUM LOWER ENGINE COVER UNDER PANEL TRAY

http://www.ebay.com/itm/271241580470?item=271241580470&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

For this one they want $420 for shipping through UPS and of course cannot guarantee fitment or at least a bit of chopping and changing would be required.

Infiniti G35 Aluminum Engine Splash Shield Under Tray Cover Black Powder Coated

http://www.ebay.com/itm/151074592895?item=151074592895&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

Also fitment cannot be guaranteed and would require chopping as G35 has a different width bumper to that of a Stagea

The second link seller has a separate item for the G35X, http://www.ebay.com/itm/Infiniti-G35X-Brushed-Aluminum-Engine-Splash-Shield-Under-Tray-Cover-Aero-Shroud-/151090681557?pt=Motors_Car_Truck_Parts_Accessories&hash=item232db4d6d5. I would assume these would be closer fit as I've noticed that on my plastic under tray is has AWD stamped on it.

fitted nismo dash... next will be HDI intercooler however when my kit arrived last Friday the core had been damage (5 badly bent fins and 1 tube damaged)

So that will have to wait.

My intention was to clean and detail my car. Instead I.

Saturday - cleaned up wiring behind the dash. Found that who ever installed the mongoose m40 immobiliser have left exposed wires everywhere and they were all tangled. So shrink wrapped all the exposed wires. Cut and untangled the rest of them and secured the box unit. Also installed the switch for the dvb tv so kids can watch it on long trips.

Sunday - cleaned up and secured all tv tuner wiring in the rear of the car. Relocated the infared receiver to infront of clock display. Found where the reverse light wire is (red with silver stripe) and ran wire to the front of car for when I do the brake mod. Just confused with what wire it was to cut (pin 55 - red with yellow strip that says its for lamp signal, pin 59 - pink with blue strip that says its for brake signal).

Doesn't work

Can't remember who was asking for the stagea manual

but i put it up on dropbox

https://dl.dropboxusercontent.com/u/36164620/Stagea%20Service%20Manual.pdf

Let me know if it doesn't work! (give it a few hours as its still uploading tho)

I'm on board if Scotty is keen enough to knock a nice looking one up!!!!

I enquired about the ones on ebay

INFINITI G35 - RARE JDM POLISHED ALUMINUM LOWER ENGINE COVER UNDER PANEL TRAY

http://www.ebay.com/itm/271241580470?item=271241580470&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

For this one they want $420 for shipping through UPS and of course cannot guarantee fitment or at least a bit of chopping and changing would be required.

Infiniti G35 Aluminum Engine Splash Shield Under Tray Cover Black Powder Coated

http://www.ebay.com/itm/151074592895?item=151074592895&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

Also fitment cannot be guaranteed and would require chopping as G35 has a different width bumper to that of a Stagea

Well i was thinking later on (after the motor swap is done) of getting a sedan one and altering it to fit the stagea nose and if that goes to plan just have them locally made?

But like the with the sedan ones there are different ones for AWD and 2WD models. So there are going to have to be ones made for the NM35 stageas and the muran...i mean PM35 stageas (im looking at you alex)

  • Like 1

Bloke? You mean Cam? Pfft. His was barely modified... As stock I agree the series two is a little better, other than the glass motor. :P

should be better.......in every aspect! It's newer for a start and it's as series 2. Pity Nissan went backwards with the power big time and economy a little!

Have to admit the last time I drove a Murano it felt about the same as a PNM35......just a little slower off the line.

Well i was thinking later on (after the motor swap is done) of getting a sedan one and altering it to fit the stagea nose and if that goes to plan just have them locally made?

But like the with the sedan ones there are different ones for AWD and 2WD models. So there are going to have to be ones made for the NM35 stageas and the muran...i mean PM35 stageas (im looking at you alex)

Undertray part number (straight out of FAST) 75892-AL800 - superseded by 75892-AL80A

Sept 01 - Jan 03 - V35 (AWD)

Aug 04 - Feb 07 - PNM35 (250RX Four & 350RX Four)

Bloke? You mean Cam? Pfft. His was barely modified... As stock I agree the series two is a little better, other than the glass motor. :P

Haha, yeah but both unmodified and lightly modified I can confirm that the series 2 is a far superior car.

Only thing the series one has over it is power... but if you go into heavy modified versions of each, I would suspect that the series 2 would have it all over the series 1 there as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...