Jump to content
SAU Community

Recommended Posts

Thinking about selling. 8k FIRM I reckon. Adelaide.

Rebuilt engine (forged) requires a tune, she's been run in enough.

The basic tune after run-in was 230-odd rwkw. Tomei cams, GT30 turbo, S15 injectors should be enough for 270+kw.

All work done by Boostworx

Rust under mirrors needs to be fixed.

1997 Series 1 Nissan Stagea RS V Four Station Wagon,
125,000kms, forged RB25DET engine, Attessa 4wd, Automatic, Rebuilt at 118k
Silky Snow Pearl, Dayz bodykit


Engine:

Bosch 040 fuel pump with direct battery feed at 13.8volts
Splitfire coil packs
NGK BCPRE6 0.8mm copper v-groove spark plugs
Davies Craig automatic transmission oil cooler upgrade kit
MV Automatic manual electronic shift kit & auto service kit
Koyo Radiator upgrade
Greddy remote oil filter relocation kit
Fujimoto sump plug drain valve
Catch can kit
Nismo adjustable fuel pressure regulator
Nismo Z32 Air Flow Meter
3” JustJap stainless steel single dump pipe system , with 3” de-cat pipe
3” cat-back exhaust system with Magnaflow mid-muffler and Kakimoto GTR Racing rear-muffler
Cold Air Radiator air guide for cold air induction
Apexi power intake pod filter, using standard snorkel air feed & under body feed
Trust 600x400mm FMIC bar & plate, with custom hard pipe kit
Hard pipe turbo intake kit
Garrett 18psi heavy duty turbo actuator
Garrett GT3076 700177-5015 IWBB Turbocharger with ported Nissan 45V4 front / AVO .73 rear housings
- 60mm diameter 84-trim GT30 turbine and 76mm diameter 7/14 bladed compressor wheel
JDM S15 Silvia 450/480cc injectors
CP forged pistons, with complete engine rebuild
ARP head stud kit
Ported, Flowed & Machined headwork including new valve seals, valve seats and valve guides
EPP Clear camgear timing cover
Cometic gasket kit including rocker cover, intake manifold, intake collector & exhaust gaskets
Cometic head gasket 87mm x1.2mm
Aerospeed adjustable exhaust cam gear pulley wheel
Tomei 256 intake / 256 exhaust poncam camshaft set
Tomei 8.8mm high lift springs
Tomei oil gallery restrictor

700177-5015 GT30R Turbo CHRA Specifications:

compressor wheel inducer size: 57.02mm
compressor wheel trim: 56mm
compressor wheel exducer size: 76mm
turbine wheel inducer size: 60mm
turbine wheel trim: 84mm
turbine wheel exducer size: 54.8mm



Suspension:

Bilstein front and rear suspension shocks, with ‘lowering’ circlips, using standard springs
Whiteline front and rear heavy-duty adjustable sway bars
Dayz adjustable engine swaybar
Whiteline front castor kit
Whiteline rear subframe pineapple alignment kit
Ox_Wheels 18x8.5” +35offset
Pirelli Pzero Corsa semi-slick 235/40/18 tyres at front

basic 235/40/18 tyres (new) at rear


Brakes:

R32 rebuilt rear brake calipers and discs, braided lines
R32 rebuilt front brake caliper, CZP brake bracket, 324x30mm drilled track rotors
Cusco brake master cylinder clamp
QFM A1RM front and rear track brake pads


Audio:

Clarion stereo tape unit with 6-stack cd player
Clarion amp mounted to enclosure for Clarion 10inch subwoofer
Pioneer 260w 4-way front door speakers
Eclipse 80w 2-way rear door speakers


Interior:

SAAS D1 Drift adjustable race seat
Flynn racing seat rail
Apexi electronic boost gauge
AEM F/IC-8 Piggyback ECU with Dell c640 latitude laptop
Greddy Profec-B spec-ii dual stage Electronic Boost Controller, set to 1.00 bar and 1.20 bar
Toshi ecu remap
Boostworx tuned 249rwkw pre-rebuild, 232rkwk after rebuild on run-in tune


Bad Points:

Under mirror rust bubble hasnt been attended to as yet.
Under rear guards the paint has chipped since the guards were slightly rolled.
Minor scratches on the roof from some low-life.

oh, and one of my headlights is out :(

fingers crossed it just the bulb

anyone have the link to the place selling the philips bulbs for a reasonable price?

Thread containing some info - http://www.skylinesaustralia.com/forums/topic/426346-c34-stagea-hid/

Ebay seller i bought off - http://www.ebay.com.au/itm/Philips-D2S-D2R-D2C-Xenon-Bulbs-6000K-35W-Maxima-02-07-/250689991471?pt=AU_Car_Parts_Accessories&hash=item3a5e49b32f

:D

Edited by Jezboosted

Some good gains there, even taking into account the different converter lock ups on the two graphs.

1/4 mile now bud.

soo close Alex........as mentioned theres more power to come! then its time.

yeah, probably time to move on. Nothing in mind, just a replacement to get from A to B.

havent got a cent to my name, being a student and all that, so its a shame that the car is being babied and doesnt have the owner being able to put some funds into it

(tune, mirror rust, etc.). if it were to get a defect Id be screwed and thats my main concern in all honesty. fuel goes quick. needs that tune!

either sell and move on, or keep and get new wheels when Im working in a few yrs time while I strip & track it (or put it all in a GT4)

would love to do some events in the future, so there is always another option..... :)

worth more in parts than whole, ie block/head/turbo is the 8k.

Installed a boost guage and found out my car is running at 0.7 bar (10 psi according to google conversion) car came with an electronic boost controller so i am assuming thats what it is set too. WIll be taking the car into the workshop in the next week or so to get it checked out by someone 'in the know' about these cars. I am still a boost noob... lol

42pe.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...