Jump to content
SAU Community

Recommended Posts

They came up well!

thanks!

damn hard work on the hands sanding.. but so satisfying when done.

Took a while as I only have cordless drills so very low speed/ torque. For about 30 bucks in materials though a new lease of life

Found this thing waiting for me when I got off work today, freshly delivered from Sendai, Japan

zxce7qyl.jpg

btw anyone have access to the Nissan Fast software to run the VIN for me? Just want to be extra sure I did in fact buy an Autech 260rs, all the signs point to that but just want to be 1000% sure

  • Like 3

ahh they are such a great car aren't they :) post up or pm me the vin and i can check.

I used the Stagea to tow the Leaf to Bathurst and back on the weekend, it made easy work of a very heavy load as always. Very happy with how the car runs, even though it has over 300,000klm on it now

Big thanks to Duncan for running the VIN for me :)

Stopped by the local Super Autobacs yesterday after work and picked up a mount to hold my phone so I can use it as a navigation and picked up some good ol' JDM squash air freshener.

fDHVq8dl.jpg

Phone mount on the left side, obviously no phone in it because I used it to take the pic :P

C4rmOSBl.jpg

and some cheeky seat belt covers that I've had in every car since I was 16, they were a gift from a friend in high school for my 16th birthday

  • Like 1

Seemed to have developed a boost or fuel cut on hard acceleration in 2nd gear and sometimes 3rd. Not sure if what has happened but feel like the engine fuel and boost all cut for a second so I let off the gas for a sec and bang all good again. Any one with thoughts on what it could be boost cut, fuel cut ? Running 19psi on max rom tuned with Walbro pump 3" turbo back and intake.

Maxing injectors maybe?

Seemed to have developed a boost or fuel cut on hard acceleration in 2nd gear and sometimes 3rd. Not sure if what has happened but feel like the engine fuel and boost all cut for a second so I let off the gas for a sec and bang all good again. Any one with thoughts on what it could be boost cut, fuel cut ? Running 19psi on max rom tuned with Walbro pump 3" turbo back and intake.

Maxing injectors maybe?

don't know if you are running with EBC. if you have EBC, you can block stock boost sensor that could let you know it is boost cut or fuel cut.

with aftermarket ECU, maybe the problem is your 3" turbo back, it will increase your boost level.

btw, do you have boost gauge to measure the boost level?

i also have some fuel cut and EMU is on my hand now :nyaanyaa:

I have a ebc and gauge reading 19psi max boost. I deleted the stock boost solenoid a year ago. How can you tell if it's boost or fuel cut by blocking the solenoid?

You can just block stock boost sensor, then you never get 21psi boost cut.

See attached pic, No.1 is boost sensor

post-137368-14575287314881_thumb.jpg

Could the factory ecu re learn itself and try to adjust for the max rom

It does exactly that, although it is fast at learning, so I would have expected it to be sorted on the dyno.

If the AFM is hitting over voltage in one particular cell it will fuel cut like this, but the voltage this happens at changes depending on the cell.

Nathan, if it is boost cut I would expect the MIL to light up. I wonder if the AFM was clamped correctly... As I said I have no idea how they tuned the HDI mate.

You can just block stock boost sensor, then you never get 21psi boost cut.

See attached pic, No.1 is boost sensor

attachicon.gifImageUploadedBySAU Community1457528730.265377.jpg

thank you gents I blocked off the map sensor this morning drove it hard to work to see if any boost cut... Seems to have done the trick.

I wasn't getting a mil light when it was happening but seems good now I'll test over the coming days and see how it goes.

I wasn't getting any cut in the dyno or for a few weeks after the tune, just came on all of a sudden. The ECU does learn at a fast rate so not sure why or how it happened.

Thanks for everyone's help with this gents [emoji106][emoji4]

  • Like 1

Some new wheels on won on auction so will have to wait for them to get delivered.

Also bought a Transgo shift kit to liven up the gear box.

The guy i bought it from has only one left. $250 + delivery.

If anyone is interested, please let me know so can pass the details on ☺️

It does exactly that, although it is fast at learning, so I would have expected it to be sorted on the dyno.

If the AFM is hitting over voltage in one particular cell it will fuel cut like this, but the voltage this happens at changes depending on the cell.

This learning only happens off boost/low load for fuel.

Finally got my AMPerformance intake fitted, straight away noticed the extra flow.

Throttle more sensitive down low, less throttle needed to get the car rolling.

Haven't tested high rpm yet.

Thanks to Craig for fitting it, wasn't easy.

  • Like 2

Finally got my AMPerformance intake fitted, straight away noticed the extra flow.

Throttle more sensitive down low, less throttle needed to get the car rolling.

Haven't tested high rpm yet.

Thanks to Craig for fitting it, wasn't easy.

Nice, and it's up high that it's makes the most difference

spent some time this weekend exploring, trying to figure out what mods were already on the car, so far I've found:

Nismo Exhaust

Nismo Air Intake

HKS EVC 3

Apexi Turbo Timer

Coilovers (brand unknown)

Carrozzeria head unit

waiting to hear back from local shop about doing a full fluid change/flush and to have them inspect the car in more detail

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...