Jump to content
SAU Community

Recommended Posts

Either the gear shifter is lower in height or the throw (so the distance between each gear) is shorter, or both of these things. It depends on the brand.

Personally i'm not a big fan of them and find the throw to be short enough the way it is.

Try not to be to quick with your shifting with a 25 box as they are a strong box but the syncros dont like it when you bash it from 2nd to 3rd, found that out myself, now my shift between 2nd and 3rd needs a slight pause or it grinds like 10 grinding things.

Mark

man up and get a c's kit phil.... you wont regret it

I'll be honest, I havn't felt a genuine C's one before. But I have felt a couple of no name ones and I think one that was a Nismo one and didn't really find it any better.

from memory, the Nismo one is not as short as the C's, IIRC Nismo = 15% short, and C's = 30% - wouldn't quote me on that though :ninja:

anyone tried one with a getrag 6? - i miss the RB25 box in comparison to the getrag :(

from memory, the Nismo one is not as short as the C's, IIRC Nismo = 15% short, and C's = 30% - wouldn't quote me on that though :ninja:

Nismo have two types, 10% and 25%. The 10% feels like a tighter stock shifter.

i have had a nismo 10% and it was pointless...

i have been running genuine c's kits in both my cars for a couple of years now and they are WELL worth the $

short definite shifts

Made my own short shifter with the standard one. Got rid of the rubber and cut it to the length I wanted and welded it up etc etc. Pretty happy with it, probably nowhere near as good as the big name brands (don't know havent ever felt one) but its alot better then standard, being solid and shorter.

So I'm happy considering it cost nothing :) C's short shifters I've heard are really good but. If I was gonna spend my money on a short shifter thats what I'd get

got a cees short shift in my track car.... i now also have f**ked syncros in 3rd and 4th..

if i had my time again with the same box i probably would not have used one.

felt great.. amazing even.. for the first 6 months. after that it got worse and worse to point where it now is un usable. im about the pull the box apart.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...