Jump to content
SAU Community

Paul Diemar From Red R Racing In Hospital After Serious Accident.


Recommended Posts

Today i found out through a friend that Paul was involved in a serious workshop accident and was admitted to John Hunter Hospital last night. He was treated in the intensive care ward overnight and appears to be recovering as he was tranfered to a general ward today. The chemical he was using contained hydrofluric acid which is extremely lethal has affected his hand, arm and shoulder as well as lung damage from inhaling the vapour. Hope all is well and he makes a complete recovery. All thoughts are with him and his family and if i recieve any updates ill post them here.

holy shit just had a google and found this http://www.carwash.com/articleprint.asp?print=1&IndexID=4230101

looks like he may have dodged a bullet if he makes a complete recovery.

Serious acid that stuff is. One of the few acids that can disolve glass. They store it in glass containers that are lined with parifin wax. It eats plastics too.

Inhaling fumes from the stuff (basically flurine gas) is worse than but similar to chlorine, or pure carbon monoxide. It instantly combines with and neutralises your red blood cells so they cant carry oxygen. So your body loses the ability to process air and you suffocate while trying to breath frantically. Probably one of the most terrifying ways to die I can think of.

Hope you recover soon Paul. I want to hear all about this top secret engine project of yours that I keep hearing whispers about!

I used this stuff for years many times without gloves when I was working in the carwash industry... was never warned about the dangers was always assured it was perfectly safe to use.

Hope he makes a full recovery.

HF is NASTY SHIT,

It is used at my work in the manufacturing of solar cells, Minimum PPE for handling the shit is: Tychem suit with hood, full face respirator, Chemical resistant boots taped at ankle and 2 pairs of gloves taped up at the wrist.

Last year a guy in WA died after spilling 100mls of HF on his leg.

I would serously recomend staying away from HF at all costs.

Paul is a extremely lucky bloke, i just got off the phone to him he seems to be doing alright considering he still has to see doctors daily for blood tests and ect. It just shows you how important it is to read the msd sheets with the chemicals and wear the approate ppe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...