Jump to content
SAU Community

Recommended Posts

its hard to see Dale cos its white and plain but once the bonnet is painted and glossy then it'll look really good.......

That is a sexy beast! Hmm bonnet upgrade one day maybe? Haha

Where did that bonnet come from? Modelled from a Dolphin or is it a Dolphin one?

yep its a freeway dolphin bonnet apparentely the first one thats popped up for sale in 4 years.

they dont make them anymore, so was lucky to pick it up second hand!!!

apparently when new they sold for $1600 but i'm hoping to make them for under $1200, going to speak to some mates but i'm thinking i need atleast 5-10 people who are keen to make it worth my while.

yep its a freeway dolphin bonnet apparentely the first one thats popped up for sale in 4 years.

they dont make them anymore, so was lucky to pick it up second hand!!!

apparently when new they sold for $1600 but i'm hoping to make them for under $1200, going to speak to some mates but i'm thinking i need atleast 5-10 people who are keen to make it worth my while.

Any chance of a carbon one...?

Any chance of a carbon one...?

couldnt be to hard LOL i'll sus it out aswell.

need to get corvettes secret in clear coating for that one LOL so it doesnt get UV damage!!!

  • 1 month later...

well after having a ball at Texi on Saturday my power steering is broken,

so its either I blew a pressure seal in the rack or the pump, its not leaking but it don't work.

at first I thought it was intermittent but now im pretty sure it doesn't work at all.

also a side note: maybe Alex would know, is the Series 1 and 2 power steering setups different seeing as the S2 came with a cooler? just wondering cos I would like to upgrade as I believe the S1 unit cant stand up to the abuse of full opposite lock drifting HAHA

I'm pretty sure the pump is the same, except a (piss small) cooler was added in one of the lines. It sits right at the front in front of the A/C condensor.

Your not running a P/S cooler? If not, get a small PWR cooler, and plumb it in the return line. I think several guys should be able to let you know their set ups. I think a seal in the pump unit is the first to go.

It's well known the pump will fail at the track without a cooler. Any small core will do, I am using a motorbike oil cooler but I have a spare small trans cooler here you could buy cheap if you want...

its called full lock drifting to much pressure/stress I would assume, I just wanted to know if the S2 pump or rack was different/better otherwise I will get mine rebuilt and modified so that this doesn't happen again if I decide to go drifting again.

like I said it wasn't leaking anywhere and I couldn't see it boiling in the reservoir and the cooler wasn't hot enough to burn my hand but that was after I felt it fail.

Did you use a spray can on the bonnet. Would look mad in 3m black or carbon vinyl wrap

yes I got the black off it and used a spray can so it wouldn't stand out as much to the police, but it'll be taken back off and finish being high filled and painted properly.

yeah it would look mad in black or carbon but I don't want it to stand out an pull unwanted attention :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
×
×
  • Create New...