Jump to content
SAU Community

Recommended Posts

Still tossing up between keeping the Brembos or fitting the Akebono set... Do I really want 19-20 inch rims? Perhaps if I can find a set of R35 wheels...

What's that I hear? Your selling me your brembos?:D

Still tossing up between keeping the Brembos or fitting the Akebono set... Do I really want 19-20 inch rims? Perhaps if I can find a set of R35 wheels...

Only if you want to be awesome like Craig and I....

Btw, 20s will be butthurt for track tyres.

Still tossing up between keeping the Brembos or fitting the Akebono set... Do I really want 19-20 inch rims? Perhaps if I can find a set of R35 wheels...

well let me know cos I got cash waiting........... is it that exact kit or only callipers ?

I'm trying to find the brake kit that Spoolin used on his car on CZP, is it the '03-'07 G35 brake kit, should bolt straight on yeah ???

http://www.conceptzperformance.com/Cart/description.php?II=3128&Car_Type=G35&UID=20130628021026115.64.91.48

Yes, except he had the silver Infiniti calipers instead of the black Nissan one's. Same-same, but different

  • 2 months later...

I haven't updated in a long time but the to do list is as follow's

1) Wideband AFR meter installed. with custom dual pod holder for it and the boost guage where the sunglass holder used to be gave up on the fibreglass and made a metal one that I now have to make pretty LOL.

2) Waiting on my OB-Link to connect up to my Nexus 7 tablet so I can run some more gauges; Water Temp, Air Temp, Oil Temp, Trans Temp, Fuel Pressure and Volts all depending if the stock ECU supports this.

3) Waiting on Flush mount bonnet pins before I get my vented bonnet sprayed and installed. (hoping to have this done before the Stagea meet on the 29th)

4) Waiting on my Akebono brakes to arrive and then I can order my 18" track rims ready for the track day on the 29th of October.

then finally #5 highflow turbo as its almost reached 100,000km and I have every chance of blowing it on the track day HAHA

along with the supporting mod's of fuel pump, injectors and a retune!!! :D

pic's will be up as soon as they are completed!!!

4) Waiting on my Akebono brakes to arrive and then I can order my 18" track rims ready for the track day on the 29th of October.

They are boxed, ready to send mate. What a mission, 70kg including the box so you will need to pick it up from the depot. I will PM you about it.

2) Waiting on my OB-Link to connect up to my Nexus 7 tablet so I can run some more gauges; Water Temp, Air Temp, Oil Temp, Trans Temp, Fuel Pressure and Volts all depending if the stock ECU supports this.

you wont get trans temp or fuel pressure, but you can display the rest

Why not sell the Fail-Con....sorry F-Con and go adaptronic with a digital dash. http://adaptronic.com.au/products.html?page=shop.product_details&flypage=flypage_new.tpl&product_id=49&category_id=5 Then you can have everything.

Better yet just get a Greddy informeter

Edited by Jetwreck

damn now I have to figure out what else might be useful instead HAHA

if you haven't got your OB-Link set up by the time the cruise comes along, you're more than welcome to have a look at my one & see what it does

and Craig, what does the informeter show that the OB-Link wont? just curious because I did consider going informeter before i got the OB-Link/tablet setup

It depends if you get the external sensor harness, then it displays oil pressure, oil temp, boost pressure, wideband o2 analogue input as well as the usual (accurate) speed, timing, injector data through the OBD2 port.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...