Jump to content
SAU Community

Recommended Posts

The first session i just wanted to see where the tyres would go pressure wise... I went out with them high knowing there was no compressor nearby at the track itself (although i saw a few around the pits during the day), after a couple of laps i had to come in as i felt they were way too high, i was right...

Pressure climbed to over 40psi so i dropped them to 32psi and waited for the next session.

Session 2 was heaps better but hot pressures were still on the high side when i came in, you can see by the time sheet that the car was getting quicker and quicker but then i was held up by a spun car after the 1.032 and when i tried to do another lap after the tyres had gone off so it was end of session.

f1ef63d1-6496-4bc4-9c65-f0ac279a423a_zps

I just realised on this... You can see the car that spun, it was David Muscat with the 1.20 lap on the same lap he slowed me down :P

Was still pretty funny though :yes:

So things have been a bit quiet with the GTT as its been locked up safe at work since the SMSP track day and was still sitting up on the trailer...

Reason for this is due to our new property having drainage issues (just like the old fkn place), so we have been working hard to get it all sorted for the past 2 months... Along with the drainage lines, pit and pipes running to the stormwater we have also done a concrete large driveway connecting the front driveway to the back shed, we have also allowed for another 2 bays in the future if we ever need it...

First time on the driveway -

IMG_0448_zpsb028ae9e.jpg

Reason for this is due to our new property having drainage issues (just like the old fkn place), so we have been working hard to get it all sorted for the past 2 months... Along with the drainage lines, pit and pipes running to the stormwater we have also done a large burnout pad, we have also allowed for another 2 bays in the future if we ever need it...

That would have cost a pretty penny lol. Is that Leonard's 180 in the shed?

That would have cost a pretty penny lol. Is that Leonard's 180 in the shed?

Lol i see a FYP!!! Nice :P But it will get me a divorce pretty quick so i better behave haha

Yep Lennys Nug80!

Posting for Driveway Skids. :woot:

Awesome setup Mat. Do Want. :yes:

Lol Shhh you :P

Hopefully we will catch up with you next time we are at Wakie?

Every day of the week if i had my choice lol... No plan yet, but it will be on the cards again this year before i start making changes :ph34r:

How about ER34s at Bathurst for speed weekend at the end of November?

Thinking Wakie Nov 1 maybe... Depends if i can get the front tyres sorted before then and i also have to measure my brakes...

Going to Trackschool on the 28th. Just saying.. :)

can't afford, just saying LOL

but I'm going to the JDMYard track day next Tuesday... probably be one of the fastest car on the straight and the slowest car around the corners LOL...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...