Jump to content
SAU Community

Recommended Posts

taken off another forum

User 1 - Caltex are only and have only produced 70% Ethanol content fuel.

Its consistant 70% all year around at three local servo's here.

User 2 - He's telling me he emailed them today and they are switching to a summer blend 85% on november 30

He has gone with the decision to tune for united and then run caltex if needed.

sits tight and waits for confirmation :D

i was running Eflex at the beginning of all this, and despite a batch or two or low to mid 60's, after that, my sensor only ever read E70,bang on every time. Even in summer. We know that Caltex up until this point has never switched to a summer blend.

Then united came back in the game (big time here in Melb) and they've been very consistent, i've never seen lower then 82 or higher than 85.

I'm more than happy to run a tank of Eflex after Nov 30th to confirm this for you :)

cool cheers might make it like a week after to make sure their tanks have been over 90% refilled with a new blend

i found a quote from Martin Donnon saying Caltex had capped their E85 @ 70% for the first 2 years maybe theyre at the end of that 2 years

i will go look for quote

Q: Whats better United E85 or Caltex E-Flex?

A: That depends on the application. The major difference is that United tends to test at around 85% - 88% Ethanol content while Caltex have frozen their E-Flex at 70% Ethanol for the first two years of production. This means that although there is around a 2% greater power potential with United, the Caltex is better in 'fuel system limited' applications where the injectors and or pump are becoming marginal

Source

to me (and i've just realised this.... hahahaha) it's like having Lindt's 70% dark chocolate compared to Greens organic single origin 85% dark chocolate... you can't go back, 70% is too sweet - you need the hard stuff from then on :D

maybe my subconscious has been directing me to choose the 85% dark chocolate lol :D haha, can't believe i haven't made this connection before!

seriously though, Greens 85% is the absolute shizzle.... just like United's E85 :D

but bring on the Caltex E85! It feels like a cop out using it at the moment, more 'true' E85 outlets the better!!

I will just stick to united 85 for now. Amazing how the powerfc is so robust still with an e85 tune still.

My car is still using the nismo intank fuel pump. Not far off from reaching the 400kw mark on basic mods. The id1000s are only maxing out between 73-78% duty. So definitely impressed it with.

Go to Trent at Chequered for any sort of tune :)

  • 2 weeks later...

Great write up Daniel.

I have a sensor ready to install in my boat, I was just wondering why you tee'd off your fuel return line and didn't run all the return fuel through the sensor?

Is the sensor restrictive?

I have twin 044's and was hoping to run the return through the sensor...

Great write up Daniel.

I have a sensor ready to install in my boat, I was just wondering why you tee'd off your fuel return line and didn't run all the return fuel through the sensor?

Is the sensor restrictive?

I have twin 044's and was hoping to run the return through the sensor...

It's too small. Tee it off

It's only in the return line, it won't affect the maximum flow as the injectors are before it.

If you look inside your reg you will probably find a 2-3mm hole for the return bypass. It won't be an issue imo. I would still 'T' it off though just to be sure.

weird how Syd seems to vary more, and seems to be more on the high side? my united has been bang on E85 last few times, and before that it generally was 82-83 - but it's still been a very tight range.

It's only in the return line, it won't affect the maximum flow as the injectors are before it.

If you look inside your reg you will probably find a 2-3mm hole for the return bypass. It won't be an issue imo. I would still 'T' it off though just to be sure.

uhh yeah. restriction in the return so will bump up fuel pressure if anything, brain fade!

its fine running it full return on a few 400 +rwkw cars now.

Wouldn't it depend on what the fuel system setup is? IE having 2 x 044's at full noise at idle (if they ain't setup in a staggered setup).

its fine running it full return on a few 400 +rwkw cars now.

So you don't have any weird fuel pressure related issues at really low load with a big (300+lph worth) where the FPR would be dumping fuel back to the return?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...