Jump to content
SAU Community

Recommended Posts

YO are much lower than MO.

imo MO and RO sit too high for anything other than a Gias / Stradia or something fixed back.

YO should be able to fit most seats, as there is plenty of room to dill addition holes.

how much is much lower through.. i just bought new seats... again.. ARK Design Sparco's... they bolt straight up to bride but he only had MO rails so I just grabbed one..

If YO sits noticeably lower, then ill be selling the MO's.

and the drift seats? biggest waste of money in my life, all the bolsters tore within a week, seats too high, and the sides started digging in... should get a pic of the sparco's they are awesome..

http://www.arkdesign-au.com/index.php?main_page=product_info&cPath=22&products_id=299

Just doing nothing.... enjoying my holidays haha

Enter this http://www.skylinesaustralia.com/forums/topic/387545-sau-forum-battle-come-one-come-all/

You get a 3 day pass. So basically only costs you $45 for the three days...

The entry ticket is almost $70 for a three day.

Aaron you should be entering as well.

how much is much lower through.. i just bought new seats... again.. ARK Design Sparco's... they bolt straight up to bride but he only had MO rails so I just grabbed one..

If YO sits noticeably lower, then ill be selling the MO's.

and the drift seats? biggest waste of money in my life, all the bolsters tore within a week, seats too high, and the sides started digging in... should get a pic of the sparco's they are awesome..

http://www.arkdesign...products_id=299

Really, I suppose that is what happens when they continue to bring the price down. What are they now? $200.

They were $450 or something 2 years ago. Quality was great. Running one of those old ones in the S15 daily and it's going good. They do sit high and you need a YO rail though, RO was like booster seat.

It was the same with a Bride Cuga as well though.

Really, I suppose that is what happens when they continue to bring the price down. What are they now? $200.

They were $450 or something 2 years ago. Quality was great. Running one of those old ones in the S15 daily and it's going good. They do sit high and you need a YO rail though, RO was like booster seat.

It was the same with a Bride Cuga as well though.

yeh i remember sitting in yours and they were completely different to mine...

theyre just shit.. so i spent abit more and did it right, auto barn said they will do a full refund aswell..

so how much lower is YO than MO.. is there a rough figure??

yeh i remember sitting in yours and they were completely different to mine...

theyre just shit.. so i spent abit more and did it right, auto barn said they will do a full refund aswell..

so how much lower is YO than MO.. is there a rough figure??

They both say 30mm iirc.

All I know is that RO + Cuga = higher than stock S15 seats.

I'm on old solid mount + old blade atm. Need one of the new soil mounts (same as in the skyline) or a YO/RX. But CBF atm.

Enter the damn SnS for Track Battle. SAU represent. Plus cheap tickets.

They both say 30mm iirc.

All I know is that RO + Cuga = higher than stock S15 seats.

I'm on old solid mount + old blade atm. Need one of the new soil mounts (same as in the skyline) or a YO/RX. But CBF atm.

yeh i got the bride book with me, they all say they sit 30mm lower than stock but they ALL say it.. id doesnt actually measure the height difference from the floor....might just leave it, the seat sits pretty low now anyway.. ill get a YO for the passenger and if there is a major difference in height, then ill get it for the driver side later on.. Thanks John appreciate it.

and i want to join, i have to see what happens with the tune on saturday first

on another note, Bank just sent me a free upgrade to Platinum...I hope thats not a sign that im spending too much money on the car... haha

Free travel insurance if tickets purchased with credit card though!

and something called concierge service?? anyone know/used it before?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...