Jump to content
SAU Community

Recommended Posts

lol i linked it coz it looks good not coz its the fastest learner legal bike! not really interested in speed at this stage, dont wanna die just yet lol

Ah okay, meh...9k for the looks is a bit :/

Kawasaki have like 11ty different models of 250cc bikes, should be able to find a Jap 250 you like the look of.

lol i linked it coz it looks good not coz its the fastest learner legal bike! not really interested in speed at this stage, dont wanna die just yet lol

Aftermarket kit by Tyga, stock looks like this. Also available for other models

1994_Honda_RVF400.jpg

Had a f1 sounding late 80's bike pass by the other day, sweeeet

Is anyone a really experienced in electrical stuff with installing gauges. A very experienced auto elec spent all day trying to get my autogauge gauges to work but in his opinion all 3 are faulty.

Had no problems wiring my mates ones on the same day. His gauges are a different type so couldnt interchange to test.

Will pay monies if anyone can fix it ASAP otherwise I'll just email just jap Monday morning to discuss the issue :(

Is anyone a really experienced in electrical stuff with installing gauges. A very experienced auto elec spent all day trying to get my autogauge gauges to work but in his opinion all 3 are faulty.

Had no problems wiring my mates ones on the same day. His gauges are a different type so couldnt interchange to test.

Will pay monies if anyone can fix it ASAP otherwise I'll just email just jap Monday morning to discuss the issue :(

My dad owns and runs an electronics repair business for 30yrs. Can have a look at it. Let me know it free tomorrow we can have a play around with it. In dandenong. Pm me for more info

Hamish I didn't go to the dyno day I went to cihan for a tune.. The cars timing was out by 10 degrees I'm suprised I didn't break something..

I'm running a Hks gtrs or whatever they're called runs like a dream now..

Only thing is there are custom wade cams are massive, so the mid range is abit flat. I think the motor was built for a massive turbo

That's pretty responsive for a gtrs on a 2L isn't it? Must be good fun now!

Hamish I didn't go to the dyno day I went to cihan for a tune.. The cars timing was out by 10 degrees I'm suprised I didn't break something..

I'm running a Hks gtrs or whatever they're called runs like a dream now..

Only thing is there are custom wade cams are massive, so the mid range is abit flat. I think the motor was built for a massive turbo

hmm seems a little low for a gt-rs.

I would expect closer to 250, what supporting mods do you ahve for it

PM sent! :thumbsup:

Did u get the stepper motor ones?

You have to wire active (red) and one of the colour (orange or white)to positive and black to ground. The orange and white is the colour of the lights.

hmm seems a little low for a gt-rs.

I would expect closer to 250, what supporting mods do you ahve for it

Ya the purple s14 with CAMS and GTRS made approx 250 on chasers dyno today.

But i think aaron runs the standard airbox?!?!?

Did u get the stepper motor ones?

You have to wire active (red) and one of the colour (orange or white)to positive and black to ground. The orange and white is the colour of the lights.

Hey John,

Yeah I got the Autogauge Shadow Pro series. Stepper Motor Series.

Red is wired to constant power. Orange to accessories, yellow to lights and black to ground. Everything was done by the auto electrician as per manual.

They all turn on but are not reading anything through the sensor. Also the water and boost gauge flash intermittently showing something is wrong.

But everything has been wired correct and checked by two seperate people :/

Have wasted a whole day on this....

Hey John,

Yeah I got the Autogauge Shadow Pro series. Stepper Motor Series.

Red is wired to constant power. Orange to accessories, yellow to lights and black to ground. Everything was done by the auto electrician as per manual.

They all turn on but are not reading anything through the sensor. Also the water and boost gauge flash intermittently showing something is wrong.

But everything has been wired correct and checked by two seperate people :/

Have wasted a whole day on this....

Ah I didn't try em that way.

Wired both into accessories. Off the back of the sig lighter.

Josh did the same with his 32 iirc

That is the stepper motor series tho

Yeah my mate bought the autogauge stepper series and installed without a problem today :(

Though he wasn't sure where you put the aftermarket oil sensor.

Where did you put yours? Any fiddling around?

pretty sure you screw your oil filter onto a sandwich plate which you connect your oil pressure/temp sensors to. no?

Aftermarket kit by Tyga, stock looks like this. Also available for other models

1994_Honda_RVF400.jpg

Had a f1 sounding late 80's bike pass by the other day, sweeeet

mmm very nice!

Edited by R-SPEC

That's pretty responsive for a gtrs on a 2L isn't it? Must be good fun now!

yeh it is but ill explain below why

hmm seems a little low for a gt-rs.

I would expect closer to 250, what supporting mods do you ahve for it

its a GTRS high flowed into an s15 compressor housing.. so its not up there at 250 flow wise, but its a hell of a lot more responsive than it usually is.. Cihan said there was definitely more power he could get out of it, but i didnt want to push it.. im happy with 230kw in a car that weighs half as much as the stag lol

Ya the purple s14 with CAMS and GTRS made approx 250 on chasers dyno today.

But i think aaron runs the standard airbox?!?!?

yeh sort of. i have the bottom of the airbox shaved off though.

i wouldnt mind chucking it on another dyno to see if there is a differing figure.

pretty sure you screw your oil filter onto a sandwich plate which you connect your oil pressure/temp sensors to. no?

mmm very nice!

Cheers Rimon

On the topic of bikes. There was a pack of bikes on princess hwy frday night doing wheeles & burnouts @ 100km/h..... :mellow:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...