Jump to content
SAU Community

Recommended Posts

on a long weekend with good weather it is

all the bikes and quick cars go thinking its going to be empty and an awesome run

but it would probably be full of slow std cars and cops trying to catch out hoons

Yeah not really expecting the roads to be empty.

So for anyone thats interested:

Meet Point: Macca's cnr of Springvale Road and Maroondah Hwy:

Time: 9:40 meet for 10am departure.

Destination: Via black spur, either going to the famous buxton burgers at the igloo or parmas up at Alexandra.

Intradasting....

May need to think of a plan B...

Yep tony, like you suggested, PLAN B!!

Still meet at the maccas on springvale rd and maroondah hwy for a 10am departure.

Pull out your map....

Take maroondah hwy down to lilydale. Turn off towards seville/ yarra junction/ warburton then head up to buxton/ alexander

Guys does anyone know much about meth kits? Methanol injection kits, connected to FMIC etc.

Need knowledge input if so.

You started your own firm or something brah? When are you hiring me?

Haha. It is in the pipeline actually, but looking at another 12 months minimum. :).

Very busy with other stuff atm.

do NOT connect it before the intercooler

only after and just before throttle body

ensure your ECU can detect if there is no meth and use alternate timing or adjust accordingly

i think it should be wired in via a pressure switch so it only comes on when boost exceeds a minimal level ie 6psi

so that it doesnt run meth when your on light cruise etc

also think it should be wired in like NOS, via the TPS, when TPS is 100% fire the meth solenoid

Guys does anyone know much about meth kits? Methanol injection kits, connected to FMIC etc.

Need knowledge input if so.

i purchased a kit but never got around to installing it.

http://www.aquamist.co.uk/vbulletin/showthread.php?t=2158

do NOT connect it before the intercooler

only after and just before throttle body

ensure your ECU can detect if there is no meth and use alternate timing or adjust accordingly

i think it should be wired in via a pressure switch so it only comes on when boost exceeds a minimal level ie 6psi

so that it doesnt run meth when your on light cruise etc

also think it should be wired in like NOS, via the TPS, when TPS is 100% fire the meth solenoid

I have no idea about it. I have a meth kit, as it came as part of a tuning kit for my car. The ECU in my car does have a 'meth' map.

i purchased a kit but never got around to installing it.

http://www.aquamist.co.uk/vbulletin/showthread.php?t=2158

I might have the same kit or similar. But mine says something about mixing water and meth in the window washer bottle.

Too much confusion.

Anyone actually installed one or know of someone who has?

Also, where to get the right meth from?

Cheers.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...