Jump to content
SAU Community

Recommended Posts

i never had any issues, and some of you know how ridiculous my wheels were on the r34, the only hassles i got were warnings and the odd thumbs up from a young cop at a booze bus lol

paranoid mohsen.

Could there be a nut on the other side of the torx thread preventing it from coming out/loose, i.e. nut and bolt combination? I've been tricked before with this kind of fastener setup. Initially it unscrews because the nut is tight up against a panel, but once the nut frees itself, the whole fastener assembly just freespins.

That or you've threaded a bolt...

hhrmm that could be the case

i guess ill keep turning it a bit more and see what happens

2 of the 4 came out very easy - its the 2 which control the angle of the wing which are both really hard to get out

Thanks brah

Mates rates?

Do you know of a good band? Vocals to rival that of The Voice/X Factor/Australia's Got talent :P?

Half the people we do audio have been within the top 20 of most of those shows anyway. If you want a good band and don't mind spending a bit look up electric empire.

One of the main bands we do audio for they opened up for aloe blacc.

Otherwise still really good but cheaper 'black label' with Laurent Soupe and Carmen Hendrix. Awesome band I can find out where they are playing next.

Electric empire are on your in France right now lol

Let me know of any bargains I need a good deal preferably a c63 for. 50k :P

Yeh I'll let you know but I highly doubt a late model c63 would go for 50k lol.

If u wait till feb our new range is coming out

its been nine month since ive gotten my licence and ive never been pulled over (randomly) despite what everyone on the internet said. pretty good considering p plater in a skyline

Without knowing your car I can only guess its stock and n/a

Try driving slammed big wheels loud exhaust & mods then you'll get loads of attention.. Also depends where you drive

Without knowing your car I can only guess its stock and n/a

Try driving slammed big wheels loud exhaust & mods then you'll get loads of attention.. Also depends where you drive

Yer it's slightly lowered but still high and has a fairly quiet exhaust. Also n/a and in dads name so I guess that helps.

Also birds, I have been done for speeding before but other than that nothing

Yeah, wait til you get pulled over when you're not breaking traffic laws :)

I used to think the same way, but then a cop went through 4 red lights to catch up to me for a "random inspection" when my car looked factory.

I think it was Alvin who got an EPA notice for his Supra that had a standard exhaust?

Yup. was me alright,

You've seen the car, it was completely stock down to the airbox. Before it got written off anyway.

Tested 87dB and 89dB on back off, guy wrote it down to 88dB, was at dalder preston or was it heidelberg, was off bell st. pretty nice guy.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...