Jump to content
SAU Community

Recommended Posts

Hey Alvin, you're still looking for engineering vac work right?

Hey Alvin, you're still looking for engineering vac work right?

Hey Alvin, you're still looking for engineering vac work right?

Hey Alvin, you're still looking for engineering vac work right?

Hey Alvin, you're still looking for engineering vac work right?

You should buy my car, it's already 3/4 way there lol same body kit just add aero fins.

And bigger injectors and 350kw your done

would have to redo suspension as I prefer my set-up, and brakes, plus the build on my motor I'm guessing was a bit different esp with some of the internal parts.

prob change rims as well to lighter ones,

short of it is I need a turbo system cams and a diff and I'm about ready.

would have to redo suspension as I prefer my set-up, and brakes, plus the build on my motor I'm guessing was a bit different esp with some of the internal parts.

prob change rims as well to lighter ones,

short of it is I need a turbo system cams and a diff and I'm about ready.

Swap bits over sell and done. I have the gtx3071 still in there bro

Speaking of Alvin, I turned his wagyu mince into a kg of spaghetti.

Will report back with taste. Already noticed it clumps more than regular mince and has less "juice" to drain.

I made hamburgers last weekend, went down pretty good.... no hairs :P

Word of advice: don't bother replacing oxygen sensors, more trouble than they're worth. Mine decided to weld itself to the bung thread.

+1 and they do nothing all the time.

If you have stalling problems, just unplug them.

It's worth it of it's an easy replace...cause you can get an extra 60-70km out of a tank of petrol. But if she's stuck firm, f**k it! Gonna cost me heaps to get my dump pipe fixed now!

Word of advice: don't bother replacing oxygen sensors, more trouble than they're worth. Mine decided to weld itself to the bung thread.

shit I replaced mine in like 30 sec...you just need the right tools

Las Vegas, your shout! :D

Vegas is overrated

if you going OS I can give good suggestions depending on what you want..

shit I replaced mine in like 30 sec...you just need the right tools

Obviously missed the part about threads welded to sensors! No tools will make that a 30 second job!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...