Jump to content
SAU Community

Recommended Posts

I am a specialist and have enough work for a lifetime but want to explore other areas.

Would like to do a MBA or CPA to expand my business knowledge

Working full time and studying sucks balls.

Do a cpa and become an accoutant haha

Doesn't necessarily stop at 20k either

^this. My job pays reasonably well for my industry and hours. I'd like to earn more but I couldn't do more than the ~45 hours I do per week without completely losing my mind. I've already done that a few times in the last year or so as I've always struggled with taking my work stress home with me. I don't really have an off switch. I'm glad I never finished the degree I was doing as sure - I'd probably be earning at least $50K more than I earn now - but I think I'd be in a mental institution drooling on my feet. You've gotta have a life. Work to live not live to work. I can say working has allowed me to waste ridiculous money on cars, buy a house (I'll be paying off the mortgage for a long time!), go away when I want to and buy a new car next year. Like I said, my pay is averageish but I've never lived beyond my means. My only debt is my mortgage.

Edited by llama_au

There is a lot of truth in that. I think a lot of people can relate. I'm currently going through a late 20's crisis, always coming back to the thought of what have I really done with my life? Need to move past it. I've got a lot longer to live more than likely.

Since we all are being philosophical, I now come to a point where I really need a career change.

My issue is that I don't have any qualifications (not even year 12), not my proudest moment ever, I don't have a clue what I want to do, where to go afterwards etc...

So, any suggestions for a career that is worth looking into (not worth suggesting brainy stuff), I'm all eyes.

Having tried mechanic, plumbing, electricial, truck driver, and even a support worker - all with miserable results, so it seems like I like chasing broken dreams.

Since we all are being philosophical, I now come to a point where I really need a career change.

My issue is that I don't have any qualifications (not even year 12), not my proudest moment ever, I don't have a clue what I want to do, where to go afterwards etc...

So, any suggestions for a career that is worth looking into (not worth suggesting brainy stuff), I'm all eyes.

Having tried mechanic, plumbing, electricial, truck driver, and even a support worker - all with miserable results, so it seems like I like chasing broken dreams.

one option is to get into a big corporate... even as a shit-kicker job and work your way up. I've seen quite a few people who've done well just getting to really know their area and then leveraging that into some bullshit project or business analysis role etc and then just move and move, move around, get to know different parts of the business. Seen a couple people with no uni/tertiary qualifications, just school, do that.

maybe look at knocking off the equivalent year 12 qualification as well??

EDIT: the other option is, and it's a bit cliched but i think has a pretty damn good grounding in fact and is probably the best place to start looking at least.... figure out what your passions are and start there. You're obviously quite practically as you've listed a few trades but is that something you enjoy? i was looking at engineering traineeships as a career change, you need yr 12 qualifications, but they pay you as you train. Decent money too, mid $60k's i believe? and it's about 3-4 years and moves up the $ scale fairly well. But i think you need at least Maths methods and a science, or maybe just one, to qualify.

something creative maybe... you can knock off some diplomas in short'ish time -

defence force?

But i think getting the year 12 sorted out probably is priority #1.

And yes, add me to the 'quarter life crisis' list... i wonder whether it's more accute for Gen Y? or if this was a gen x thing as well? not sure if the feeling would have been as pervasive amongst the Boomers...

+1 mid 20s life crisis

And yeh hamish that's for one person

Grant don't look at what job you should do, ideally work out what you like doing and then work out how to get paid for it

Edited by alr33x

one option is to get into a big corporate... even as a shit-kicker job and work your way up. I've seen quite a few people who've done well just getting to really know their area and then leveraging that into some bullshit project or business analysis role etc and then just move and move, move around, get to know different parts of the business. Seen a couple people with no uni/tertiary qualifications, just school, do that.

maybe look at knocking off the equivalent year 12 qualification as well??

Daniel, thanks for a suggestion, I'd need to find one willing to take me in (usually my biggest problem trying to telling them I'm as good as anyone), about year 12 qualification that is tough cos I've attempted year 12 3 times but don't have the motivation to continue, besides I'm 25 now and I feel it's too late for me to attempt another 'waste of time venture' by doing it... I guess a pay check motivate me better than anything, I'm sure it'd be same for everyone.

Plus, I'm unsure how to go in a big corporate as they usually don't advertise directly so I'd have to know someone who knows someone, that sort of things yeah?

I suppose I could stay at Coles but I know I won't work my way up with them, and to be frank it does get boring/frustrating (sometimes both) to work, at least it pays alright for what it is and I'm grateful for that.

Alex, to be honest, I have only one hobby (yes, I need more hobbies!) that is cars BUT I don't want to work in a industry that is either dying or will make me hate it - have seen people hating cars (usually mechanics) after working in this industry. Won't bother doing apprenticeship simply the fact I'm 25 - cruel I know, in the end of the day every business want to cut the costs to maximise profits blah blah blah, etc...

Damn, I feel intelligent now!

Edited by Count Grantleyish

what industry you want to get into?

Any job that is better than my current job for a start, wouldn't mind getting in banking even though my maths suck balls. I'll just tell them I'm good with saving monies.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...