Jump to content
SAU Community

Recommended Posts

Sparkies brah

I'm gonna be in Epping tomorrow, have 30 minute lunch break....Suggestions on things that I must do in Epping?

Please respond.

Stay alert, theyll nick the air out of ya tires up that way

Singapore noodles in Singapore. do it.

apparently my ex said technically there are no such things as Singapore noodles in Singapore. Alvin may confirm?

She used to get pissed off when I would tease her about them and us having them here

on another note, just picked this up from Japan :D

mirin my tiny coolah

n031217019-img600x450-1345986310qu8m6j51280.jpg

From yahoo? Link I posted?

EAT!

places that you have to go to:

1) old airport rd Hawker centre (take the MRT to Dakota station and it's a 200m walk)

just look for the places with long lines and que up.

Every place i went to there (i at at probably 15 of the stalls) I just said "gimmie your best dish, i eat everything"

2) Tiong Bahru Hawker Centre (take the MRT to Tiong Bahru station)

same deal as Old Airport Rd but close to chinatown. not as big, but most definately worth it -especially for the tiong bahru chicken rice

3) Chin Chn Eating House (19 Purvis Street - less than a block away from Raffles)

you MUST have the chicken rice and the Tom Yum here. best I have ever had. Before I ate here i thought chicken rice was pretty ordinary, but chin chin will make you understand why its the national dish

4) Haji Lane and arab st

- great middle eastern food and shisha

5) fish head curry

eat this in one of the hawker centres- it's the other national dish.

6) tiger beer

drink this

7) Orchard Rd

bring your wallet lol

Make sure you have black pepper crab, fark all this chilli crap shit... black pepper is the kouta!!!

Keep in mind I need 5 minutes to get off site and 5 minutes to get back on, so 20 minutes sight seeing time

I work at the market relocation lol

thats about all there is in Epping, go check out the rock crushing machine...its pretty cool...

how long you working there for?

wheres dis porn pic :(

was removed...

From yahoo? Link I posted?

From yahoo but not your link.

Managed to find another auction which came with the mounting brackets...now i need to work out where they mount to...cant seem to be able to find an apexi installation manual on the internet :/

apparently my ex said technically there are no such things as Singapore noodles in Singapore. Alvin may confirm?

She used to get pissed off when I would tease her about them and us having them here

From yahoo? Link I posted?

Make sure you have black pepper crab, fark all this chilli crap shit... black pepper is the kouta!!!

totes.... only had chilli crab once when i was there and it was pretty fkn average.... don't think i'll bother again unless i hit up Sri Lanka

totes.... only had chilli crab once when i was there and it was pretty fkn average.... don't think i'll bother again unless i hit up Sri Lanka

Sri Lanka..only place I will ahve fish head curry..

i'm a fan of crab.

but not this aussie mud crab shit.

got a great palce in san fran..hell I flew there just for the dinner

fiji Vanuatu.

going to try the one in Phillo next.

then temple st hairy crab!

5391740_700b.jpg

would have been funnier with red back spiders in shoes.

as a kid I used to walk ou the back of the house tap my gum boots on the ground knock the red backs out them put them on to do my errands.

sad but true

funniest was we used to have an out door dunny.

till the day my old man was doing his civic duty and a tiger snake decided to help him out.

we got a new bathroom with indoor plumbing shortly there after.

From yahoo but not your link.

Managed to find another auction which came with the mounting brackets...now i need to work out where they mount to...cant seem to be able to find an apexi installation manual on the internet :/

Probably need to make up your own brackets knowing it :P

totes.... only had chilli crab once when i was there and it was pretty fkn average.... don't think i'll bother again unless i hit up Sri Lanka

Yeah I had both we a group of us went out over there, chilli crab is really average

Black pepper crab is spicer and you don't spoil the sweet crab meat to much like the overpowering chili crab

Does anyone have the contact details for the SAU user pandaGTR?? He contacted me via PM but i've been having difficulty getting in touch with him over the forums. He lives in Vic and i know a bunch off people have dealth with him though it seems like that was some time ago. Cheers

My lock is fked on the inside, when I lock it on the inside, sometimes i can't unlock it without using the key. But you can open the door if you push the inside lock to the open position, but as soon as you let go it locks again. So when picking up the lip. I locked myself out. Car still running, double parked at glenny. Had my window down but not enough to fit in arm. Attempted to push window down, no luck. Ended up ripping off the door pillar plastic trim. Pulling out the window out of its vertical rail, Managed to fit my arm in and open the door. Wind window all the way down then up again to settle in rail. So lucky didn't have to smash window. Can't afford that shit.

Result:

szif7r.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...