Jump to content
SAU Community

Recommended Posts

What's the plan for everyone in today's weather?

Be home by 12:15pm, paid for a full day.

Meant to go see cirque du soleil tomorrow night, gf got sick and missed flight, stuck overseas..

To sell or not...

Seems a bit drastic...Fair enough she missed the flight, but give her a second chance before you put her up for sale.

Gotta love rewiring these filthy old houses on 30+ degree days breathing in 5000 year old insulation

#f**kdomestic

would I get away with saying $5k for an evo seeing as it is listed as a 2001 lancer?

or do they inspect it now?

(it's been a LOOOOOOONG time since I bought a car with rego)

My 2008 CBR600RR cost me $2k, apparently.

would I get away with saying $5k for an evo seeing as it is listed as a 2001 lancer?

or do they inspect it now?

(it's been a LOOOOOOONG time since I bought a car with rego)

If its only listed as a lancer they wont know. They don't inspect straight transfers, they dont even inspect if you buy a car from interstate aslong as it has reg on it.

Purchase price or market value - whichever is higher. So if you sell a car to a relo for $10 you should put market value... Believe vicroads can fine if you put something unreasonable

State revenue office will make you pay the difference, happened to my brother once.

Seems a bit drastic...Fair enough she missed the flight, but give her a second chance before you put her up for sale.

My 2008 CBR600RR cost me $2k, apparently.

Lol

My old man is still angry about the transfer fee on his car, and that was in 09. No cap on it is bullshit

If ya dislike car transfers buying a house will rile your jimmies something shockin best part of 20k in most instances

Obviously depends how much you buy for but $500+ expect that minimum. At least the first time you get a handy discount

Joanna?

Yeah the photographer loves us, always taking pics. If you're looking for that girl in the Barry albums, good luck lol...it was over 2 months ago, wasn't it?

they have albums with dates on it, would be easy if i knew the exact date but yeah cbf looking through lol

If ya dislike car transfers buying a house will rile your jimmies something shockin best part of 20k in most instances

Obviously depends how much you buy for but $500+ expect that minimum. At least the first time you get a handy discount

yeah I know this.... just you wait for the tyrade when that happens :/

that post will have more swear words that Django Unchained said nigger

EPIC film BTW

they have albums with dates on it, would be easy if i knew the exact date but yeah cbf looking through lol

I have one photo on my phone that she sent the next day, but from memory it was taken at some camping music festival (Meredith?) so she looks kinda bad in it.

Y thank you :D

Btw I think I saw your missus from beauty and geek on Dorset road in the morning. It was like 8am and she was all dressed up waiting on the street. /toomucheffortforboronia straya

Millie? she has personalized plates lol should be cruising in a Barina by now i think :P

yeah I know this.... just you wait for the tyrade when that happens :/

that post will have more swear words that Django Unchained said African American

EPIC film BTW

Watched it last night was allright!

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...